Samsung Guide to CLP-325W and CLP-320 Factory Reset and SyncThru™ Web Service Setup

example, 00:15:99:29:51:A8 becomes 0015992951A8.

•IP Address: Enter a new IP address for your printer.

For example, if your computer’s IP address is 192.168.1.150, enter 192.168.1.X. (X is number between 1 and 254 other than the computer’s address.)

•Subnet Mask: Enter a Subnet Mask.

•Default Gateway: Enter a Default Gateway.

6.Select Apply, then OK, and OK again. The printer will automatically print the configuration report. Confirm that all the settings are correct. Quit Safari. You may close and eject the installation CD-ROM. If necessary, restart the computer’s firewall. You have successfully changed the IP address, subnet mask, and gateway.

IPv4 setting using SetIP Program (Linux)

SetIP program should be automatically installed during the printer driver installation.

The path and UIs may differ by Linux OS version. Refer to the Linux OS manual to turn firewall off.

1.Print the machine’s network configuration report to find your machine’s MAC address.

2.Open the /opt/Samsung/mfp/share/utils/.

3.Double click the SetIPApplet.html file.

4.Click to open the TCP/IP configuration window.

5.Enter the network card’s MAC address, IP address, subnet mask, default gateway, and then click Apply.

When you enter the MAC address, enter it without a colon(:).

6.The machine prints the network configuration report. Confirm all the settings are correct.

7.Close the SetIP program.

IPv6 configuration

TCP/IPv6 is supported properly only in Windows Vista or higher.

If the IPv6 network seems to not be working, set all the network setting to the factory defaults and try again (See "Restoring factory default settings using SyncThru™ Web Service" on page 36).

To use the IPv6 network environment, follow the next procedure to use the IPv6 address.

The machine is provided with IPv6 feature on.

1.Connect your machine to the network with a network cable.

2.Turn on the machine.

3.Print a Network Configuration Report from the machine’s control panel that will check IPv6 addresses.

4.Select Start > Control Panel > Hardware and Sound > Printers > Add Printer.

5.Click Add a local printer on the Add Printer windows.

6.Follow the instruction on the window.

If the machine does not work in the network environment, activate IPv6. Refer to the next section followed by.

Printing network configuration report

You can print a Network Configuration Report from the machine's control panel that will show the current machine’s network settings. This will help you to set up a network and troubleshooting problems.

To print the report:

In ready mode, press and hold the (cancel button) for about 5 seconds. You can find your machine’s MAC address and IP address. For example:

•MAC Address: 00:15:99:41:A2:78

•IP Address: 192.0.0.192

Setting IPv6 addresses

Machine supports following IPv6 addresses for network printing and managements.

•Link-local Address: Self-configured local IPv6 address. (Address starts with FE80.)

•Stateless Address: Automatically configured IPv6 address by a network router.

•Stateful Address: IPv6 address configured by a DHCPv6 server.

•Manual Address: Manually configured IPv6 address by a user.

Manual address configuration

1.Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL (See "SyncThru™ Web Service" on page 34).

For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go.

2.When the SyncThru™ Web Service window opens, click Network Settings.

3.Click TCP/IPv6.

4.Enable the Manual Address In the TCP/IPv6 section.

5.Select the Address/Prefix and click the Add button, then the router prefix will automatically be entered into the address field.

Enter the rest of address. (ex: 3FFE:10:88:194::AAAA. “A” is the hexadecimal 0 through 9, A through F.)

6.Click the Apply button.

Installing printer driver

Driver installation for network printer in IPv6 network environment is same as TCP/IPv4 (See "Installing network connected machine’s driver" on page 37).

Select TCP/IP Port and when the list of machines are displayed, simply select your machine's IPv6 address.

Using SyncThru™ Web Service

1.Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL.

2.Select one of the IPv6 addresses (Link-local Address, Stateless Address, Stateful Address, Manual Address) from Network Configuration Report.

3.Enter the IPv6 addresses. (ex: http://[FE80::215:99FF:FE66:7701]) Address must be enclosed in '[]' brackets.

Restoring factory default settings using SyncThru™ Web Service

1.Start a web browser such as Internet Explorer, Safari or Firefox and enter your machine’s new IP address in the browser window.

For example,

2.Click Go to access the SyncThru™ Web Service.

3.Click Login on the upper right of the SyncThru™ Web Service website.

Network setup (CLP-320N(K)/CLP-321N/CLP-325W(K)/CLP-326W only)_ 36