Media and tray_ 53
Changing the tray size
To load different sizes of paper, such as Legal-sized paper, you need to
adjust the paper guides to extend the paper tray.
To change the tray size to other size, you must adjust the paper
length/width guides properly.
3
2
1
4
1Paper extend lever
2Paper cover
3Paper length guide
4Paper width guide
1. Pull the tray out of the machine. Open the paper cover and remove
paper from the tray if necessary.
2. Pressing and unlatching the guide lock in the tray, pull the tray out
manually.
1
3. Place paper with the side you want to print facing up.
4. Slide the paper length guide until it lightly touches the end of the paper
stack. Squeeze the paper width guide and slide it to the edge of the
paper stack without causing it to bend.
For paper smaller than Letter-sized, return the paper guides to their
original positions and adjust the paper length guide and paper width
guide.
If the paper that you need to print is shorter than length 222 mm (8.74
inches), press and unlatch the guide lock in the tray, push the tray in
manually. Adjust the paper length guide and paper width guide.
1
2
•Do not push the paper width guides far enough to cause the
materials to warp.
•If you do not adjust the paper width guides, it may cause paper
jams.