Troubleshooting
If the wireless signal indicator shows no bars:
•Relocate the display unit and/or the outdoor sensor. The units must be within 165 ft (50 m) of each other.
•Make sure both units are placed at least 3 feet (.9
No outdoor sensor m) away from electronics that may interfere with the
|
| reception | wireless communication (such as TVs, microwaves, | |||
|
|
|
| no bars | computers, etc). | |
|
|
|
| |||
|
|
|
| • Use standard alkaline batteries (or lithium batteries in | ||
|
| |||||
| ||||||
|
|
|
|
| sensor when temperature is below | |
|
|
|
|
| use heavy duty or rechargeable batteries. NOTE: It | |
|
|
|
|
| may take up to 20 minutes for display unit and sensor | |
|
|
|
|
| to synchronize after batteries are replaced. | |
|
|
|
|
|
| |
Display screen | • Check that the batteries are installed correctly. | |||||
not working | Batteries may need to be replaced. | |||||
|
|
|
|
|
| |
|
|
|
|
| Flashing of the outdoor temperature is generally an | |
|
| Outdoor | indication of wireless interference. | |||
|
| 1. Bring both the sensor and display unit indoors and | ||||
temperature | remove at least one battery from each. | |||||
is flashing or | 2. Reinstall the battery in the outdoor sensor. | |||||
showing dashes | 3. Reinstall the battery in the display unit. | |||||
|
|
|
|
| 4. Let the units sit within a couple feet of each other | |
|
|
|
|
| for about 20 minutes to gain a strong connection. | |
|
|
|
|
|
| |
|
|
|
|
| • Weather Forecast icon predicts conditions for the next | |
|
|
|
|
| 12 to 24 hours, not current conditions. | |
|
|
|
|
| • Has Learning Mode icon disappeared from the | |
|
|
|
|
| display unit? Learning Mode must complete before | |
Inaccurate forecast | forecast and pressure will be accurate. | |||||
• Allow unit to run continuously for 33 days. Battery | ||||||
|
|
|
|
| ||
|
|
|
|
| removal or resetting the display unit will restart | |
|
|
|
|
| Learning Mode. After 14 days, forecast should be | |
|
|
|
|
| fairly accurate, however Learning Mode calibrates for | |
|
|
|
|
| a total of 33 days. | |
|
|
|
|
|
| |
| Inaccurate | • Make sure both the display unit and sensor are | ||||
| placed out of direct sunlight and away from any heat | |||||
temperature | ||||||
sources or vents (see page 6). | ||||||
|
|
|
|
| ||
If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877)
8
