Panasonic DMCZS25K, DMC-ZS25 TV, computer, printer continued, Others, Q&A Troubleshooting

Others

Q&A Troubleshooting

TV, computer, printer (continued)

Cannot communicate with the computer. ●●Not connected correctly. (→139)

●●Check whether computer has recognized camera. ●●Set [USB Mode] to [PC]. (→50)

●●Turn the camera off and then on again.

Computer does not recognize card (only reads built-in memory). ●●Disconnect USB connection cable and reconnect with card in place.

Computer does not recognize card. (When using an SDXC Memory Cards)

→Check whether your computer is compatible with SDXC Memory Cards. http://panasonic.net/avc/sdcard/information/SDXC.html

→A message prompting you to format the card may appear when you connect it. Do not format the card.

→If the [Access] indicator on the LCD monitor does not go off, turn the camera off before disconnecting the USB connection cable.

Cannot print when connecting to printer. ●●Printer not compatible with PictBridge. ●●Set [USB Mode] to [PictBridge(PTP)]. (→50)

The edges of pictures are cut off when printing.

●●Release any trimming or edgeless printing settings on printer before printing. (Consult printer operating manual.)

●●The pictures were recorded in aspect ratio.

→ If printing in shop, check if 16:9 sizes can be printed.

Cannot print panorama pictures properly.

●●The aspect ratio of panorama pictures is different from that of regular still pictures, and some panorama pictures may not be printed correctly.

→Use a printer with support for panorama pictures. (Refer to the instruction manual for the printer.)

→We recommend adjusting the size of a picture in accordance with print paper using the “PHOTOfunSTUDIO” software on the CD-ROM (supplied).

- 157 - VQT4P14