Panasonic DMCZS25K Monitor Luminance, Settings Auto Power Monitor, Guide Line, Settings Rec. Info

Basics

Using the [Setup] menu

••For the setting procedures of the menu. (→42)

[Monitor Luminance]

Make LCD monitor easier to see.

■■Settings

[Auto Power Monitor]:

The brightness is adjusted automatically depending on how bright it is around the camera.

[Power Monitor]:

Makes screen brighter than normal (for outdoor use). [High Angle]:

Makes the LCD monitor screen easier to see when the camera is held above eye level.

[OFF]

●●Cannot select [Auto Power Monitor] and [High Angle] in playback mode.

●●[Power Monitor] returns to ordinary brightness if there is no operation for 30 seconds when recording. (Press any button to make the screen brighter again.)

●●[High Angle] will be canceled if the camera is turned off.

●●Because the picture shown on the LCD monitor screen emphasizes brightness, some subjects may look different than their actual appearance, but this will not affect the recorded picture.

●●Setting [Monitor Luminance] reduces the operating time.

[Guide Line]

Select recording information display and types of guidelines.

■■Settings [Rec. Info.]

[ON] (Display recording information with guidelines.)

[OFF]

[Pattern]

/ : Change the patterns of guidelines.

●●When [Intelligent Auto] Mode has been selected, only is displayed. Also, recording information and guidelines cannot be displayed simultaneously.

●●Cannot be used in the following case: ••[Panorama Shot] Mode

- 47 - VQT4P14