Panasonic DMC-ZS25, DMCZS25K 106, Stabilizer, Date Stamp, Settings W/O Time / with Time / OFF

Application (Record)

Using the [Rec] menu

••For the setting procedures of the menu. (→42)

[Stabilizer]

Automatically detects and prevents jitter.

When recording motion pictures, [Active Mode] (stabilizer for motion pictures) will automatically function. This decreases the jitter of the image when recording motion pictures while walking, etc.

■■Settings: [ON] / [OFF]

●●The setting is fixed to [ON] either during motion picture recording or in [Handheld Night Shot] Scene Mode.

●●The setting is fixed to [OFF] in the following Scene Modes: ••[Starry Sky] [3D Photo Mode]

●●Cases where Optical Image Stabilizer may be ineffective: ••When there is a lot of jitter

••When the zoom magnification is high (also in the Digital Zoom range) ••When taking pictures while following a moving subject

••When the shutter speed becomes slower to take pictures indoors or in dark places ●●In [Active Mode], stronger effect of the correction can be achieved at the wide end. ●●In the following case, [Active Mode] will not function even when recording motion

pictures.

••When [Rec Quality] is set to [VGA/30p] in [MP4]

[Date Stamp]

Still pictures can be taken with the recording date and time stamped on the still picture.

■■Settings: [W/O TIME] / [WITH TIME] / [OFF]

●●Date stamps on still pictures cannot be erased.

●●The date cannot be stamped when [Auto Bracket] or [Burst] is set, when recording a motion picture, or when the [3D Photo Mode] Scene Mode is set.

●●Do not request date printing in store or make date printing on printer for still pictures with date stamps. (Date printing may be overlapped.)

●●Cannot change the setting in [Intelligent Auto] Mode. The setting in other Recording Mode is applied.

[Clock Set]

Set the clock. Same function as that in [Setup] menu.

For details (→19).

- 106 - VQT4P14