23Using MIDI
Control Chan
g
e — adds effects such
as vibrato and volume changes applied
during keyboard play. The message in-
cludes a control number (the effect type)
and a control value (the on/off and depth
of the effect).
Here is the data that can be received
with this keyboard and the correspond-
ing control number.
The keyboard can send Hold1 Control
Change data only when you connect a
sustain pedal and press it.
CHANGING MIDI SETTINGS
The keyboard lets you change two MIDI
parameters, Tone Map and Keyboard
Channel.
Keyboard Channel — sets the channel
for sending MIDI data to an external de-
vice (Default : 01). The keyboard receives
MIDI data on channels 1 through 4 and 10
only. The data received on other channels
are ignored. For transmission of MIDI da-
ta, you can use any of 16 channels.
1. Repeatedly press TRANSPOSE/
TUNE/MIDI until Keybd Ch appears.
2. Within 5 seconds, press – or + to
select the channel you want.
Tone Map —sets the range of program
change values received/recognized by
this keyboard.
1. Repeatedly press TRANSPOSE/
TUNE/MIDI until TonMap=N
appears.
2. Within 5 seconds, press – or + to
select the setting you want.
N: Normal Tone Map. This setting
allows receipt of 0 to 99 program
changes. Each program change
corresponds to one of the key-
board’s prerecorded tones.
G: General MIDI Tone Map. This
setting allows receipt of all 0 to 127
program changes. Any data over
100 are translated to the closest
tone the keyboard has. See “Note
Table” on Page29 for details.
Select G when you listen to General
MIDI data from an external device.
NOTES ABOUT THE MIDI IMPLEMENTATION CHART
The “MIDI Implementation Chart” on
Page 30 illustrates the details of the key-
board’s MIDI function. An O in the chart
means that the keyboard has this fea-
ture; X means it does not have this fea-
ture. The following notes explain what
the keyboard can do.
Basic Channel — MIDI uses up to 16
channels to exchange data. As in a TV
broadcast, different channels send dif-
ferent data. The keyboard can send data
in any of 16 channels, but receives data
only on channels 1 through 4 or 10.
Effect Control
Number
Modulation 1
Volume 7
Pan 10
Hold1 (Sustain) 64