Panasonic KX-TDA30 installation manual Connection of Door Openers to DPH4 Card

2.9 Connection of Doorphones and Door Openers

Connection of Door Openers to DPH4 Card

Use 8-pin and 10-pin terminal blocks (included with the card) for connection.

1.While pressing down on the hole at the top of the terminal block using a screwdriver, insert the wire into the side hole as shown below. Repeat this procedure for other doorphones and door openers.

Refer to "2.5.1 DPH4 Card" and "2.5.2 DPH2 Card" for pin assignments.

Doorphone

Door Opener

2.Attach the terminal blocks to the connectors of the DPH4 card on the Hybrid IP-PBX.

To door openers

132 Installation Manual