Panasonic KX-TDA30 2.2.5Frame Earth Connection, Connect the frame of the Hybrid IP-PBXto earth

2.2 Installation of the Hybrid IP-PBX

2.2.5Frame Earth Connection

IMPORTANT

Connect the frame of the Hybrid IP-PBX to earth.

1.Loosen the screw.

2.Insert an earthing wire (user- supplied)*.

3.Tighten the screw.

4.Connect the earthing wire to earth.

Screw

Earthing wire

To Earth

*For earthing wire, green-and-yellow insulation is required, and the cross-sectional area of the conductor must be more than 0.75 mm2 or 18 AWG.

•Be sure to comply with applicable local regulations (e.g., law, guidelines).

•Proper earthing (connection to earth) is very important to protect the Hybrid IP-PBX from the bad effects of external noise or to reduce the risk to the user of electrocution in the case of lightning strike.

•The earthing wire of the AC cable has an effect against the external noise and lightning strikes, but it may not be enough to protect the Hybrid IP-PBX. A permanent connection between earth and the earth terminal of the Hybrid IP-PBX must be made.

Installation Manual

39