Panasonic KX-TDA30 installation manual 2.6.5First Party Call Control CTI Connection

2.6 Connection of Extensions

2.6.5First Party Call Control CTI Connection

CTI connection between a PC and a KX-T7633/T7636 DPT provides the first party call control. The CTI connection is made via USB interface (version 1.1), and uses the CSTA Phase 3 protocol.

A USB Module (KX-T7601) must be connected to the KX-T7633/T7636 DPT.

Note

The operating system of the PC required for first party call control depends on your CTI application software. For details, refer to the manual for your CTI application software.

To PC

USB Cable

USB Module

Note

USB Port

Maximum length of the USB cable is 3 m.

84

Installation Manual