Panasonic KX-TDA30 Example: Installing in a Room Separated by Walls, Things to take note of

Models: KX-TDA30

1 176
Download 176 pages 5.71 Kb
Page 92
Image 92
Example: Installing in a Room Separated by Walls

2.7 Connection of DECT Portable Stations

b.If 1 CS cannot cover the entire service area, install additional CSs as required. Overlap the coverage areas of adjacent CSs.

Where CS coverage areas overlap, the PS will start call handover to the next CS if the signal from one CS becomes weak. However, if a PS moves away from a CS and there are no CSs available for handover, the PS may go out of range and the call could be lost.

Example: Installing in a Room Separated by Walls

Things to take note of:

The room is separated by walls.

The room is surrounded by concrete walls.

CS installation plan:

The coverage area of each CS will not extend as much it does where there is no obstacle, because the radio signals will be weakened by separating walls. Therefore, you will need 5 CSs to cover the entire room.

150 m

70 m

CS no. 1

CS no. 2

CS no. 5

CS no. 3

CS no. 4

92

Installation Manual

Page 92
Image 92
Panasonic KX-TDA30 Example: Installing in a Room Separated by Walls, Things to take note of, CS installation plan