Panasonic KX-TDA30 installation manual 4.1.4Using the Reset Button, Operation, Notes

4.1 Troubleshooting

4.1.4Using the Reset Button

If the Hybrid IP-PBX does not operate properly, use the Reset Button. Before using the Reset Button, try the system feature again to confirm whether there definitely is a problem or not.

Notes

1.When the System Clear Switch is set to the normal position, pressing the Reset Button causes the following:

•Camp-on is cleared.

•Calls on hold are terminated.

•Calls on exclusive hold are terminated.

•Calls in progress are terminated.

•Call park is cleared.

Other data stored in memory, except the above, are not cleared.

2.After sliding the System Clear Switch towards the Reset Button, you must press the Reset Button with caution, because all data stored in memory will be cleared by the following operation: (1) pressing the Reset Button and then, (2) setting the System Clear Switch back to the normal position while the RUN indicator is flashing (within approximately 10 s).

Operation

1.If the Hybrid IP-PBX does not operate properly:

a.Make sure that the System Clear Switch is set to the normal position.

b.Press the Reset Button.

RUN Indicator

Reset Button

System Clear Switch

2.If the Hybrid IP-PBX still does not operate properly:

a.Slide the System Clear Switch towards the Reset Button.

b.Press the Reset Button.

c.Set the System Clear Switch back to the normal position while the RUN indicator is flashing (within approximately 10 s).

Installation Manual 161