2.7 Connection of DECT Portable Stations
Connecting the CS
1.Connect the cable from a hybrid extension port, the DLC4/DLC8 card to the CS.
Modular
To a hybrid extension port, or DLC4/DLC8 card
2.Pass the cable through the groove of the CS (in any direction depending on your convenience). Wrap the cable once around the ferrite core. Then close the case of the ferrite core.
TO MAIN UNIT
/ PABX
To a hybrid extension port,or DLC4/DLC8 card
Note
If you need to open the ferrite core, use a flathead screwdriver to unlatch the case of the ferrite core.
Installation Manual 101
