Panasonic KX-TDA30 installation manual When country/area data do not match

3.3Installation of the KX-TDA Maintenance Console

1.Click "Start" "Programs"

"KX-TDA Maintenance Console" "KX-TDA Maintenance Console".

2.Type the Installer Level Programmer Code (default: 1234), then click [OK].

The Programmer Code authorises different programming levels, and the Quick Setup is only available when you start the KX-TDA Maintenance Console with Installer Level Programmer Code.

Note

There are 2 other Programmer Codes with limited authorisation: Administrator Level (default: 1111), and User Level (default: none).

3.Click "Connect" "USB" from the menu bar.

Note

To connect with USB, you need to have installed the KX-TDA USB driver. Follow the instructions of the wizard to install the KX-TDA USB driver.

4.Type the system password for installer (default: 1234), then click [OK] to log-in.

5.When country/area data do not match:

a.Click [OK] to replace the country/area data of the Hybrid IP-PBX. Replacement may take several minutes to complete.

b.Follow the procedure described in "2.12.1 Starting the Hybrid IP-PBX"and restart the Hybrid IP-PBX.

c.Repeat steps 1 to 3 to restart the KX- TDA Maintenance Console.

Installation Manual 149