Troubleshooting
If your keyboard is not performing as it should, these suggestions might help. If you still cannot solve the problem, take the keyboard to your local RadioShack store for assistance.
Trouble | Possible Cause | Remedy | |
|
|
| |
|
|
| |
No sound, even if keys | The keyboard has turned | Set POWER/MODE to OFF | |
are pressed. | off automatically. | then ON again. | |
|
|
| |
| Volume is turned down. | Repeatedly press MAIN VOL- | |
|
| UME ▲ to increase the volume. | |
|
|
| |
| Headphones are con- | Disconnect headphones. | |
| nected. |
| |
|
|
| |
| Power supply problem. | Check the power supply. | |
|
| Are battery symbols | |
|
| ||
|
| Are the batteries fresh? | |
|
| Is the AC or DC adapter con- | |
|
| nected properly? | |
|
|
| |
| You are pressing too few | Set POWER/MODE to NOR- | |
| accompaniment keys | MAL or CONCERT CHORD. | |
| while POWER/MODE is |
| |
| Press 3 or 4 keys to form a | ||
| set to FINGERED. | ||
| chord while POWER/MODE is | ||
|
| ||
|
| set to FINGERED. | |
|
|
| |
No sound when con- | Volume is turned down. | Repeatedly press MAIN VOL- | |
nected to an external |
| UME ▲ to increase the volume. | |
amplifier. |
|
| |
Defective connection cord. | Replace the connection cord. | ||
| |||
|
|
| |
The key or tuning does | The tuning or transpose | Set the tuning or transpose to 0 | |
not match when playing | parameter is set to a value | or 00. | |
along with another MIDI | other than 0 or 00. |
| |
instrument. |
|
| |
|
|
| |
No sound when receiving | MIDI cables are not con- | Check the connection. | |
and playing MIDI data. | nected properly. |
| |
|
|
| |
Bass notes in General | Tone map parameter is set | Set the tone map parameter to | |
MIDI data are sent out | to N. | G (see “Changing MIDI Set- | |
one octave lower. |
| tings” on Page 23). | |
|
|
|
Troubleshooting | 25 |
