Panasonic DMC-ZS25, DMCZS25K owner manual Burst function, Setting Speed Description No. Pictures

Application (Record)

Burst function

A burst of still pictures can be recorded while the shutter button is pressed fully.

Select [Burst] from the [Rec] menu (→42)

Use cursor button to select the burst setting, and press [MENU/SET]

Setting	Speed	Description	No. of
			pictures
	Approx. 2	••The subject is brought into focus as far as this
	pictures/sec.	is allowed by the burst speed. The pictures are	100∗1
		taken with the burst function while the exposure
	Approx. 5	and White Balance are being adjusted.
		••The burst speed may be reduced under certain
	pictures/sec.	recording conditions.
		Speed: Approx. 10 pictures/sec.
∗2		••Note on the available picture size settings (→89).
	Complies with	••The number of Burst recording pictures may
		increase when you use a card with fast writing	100∗1
([Hi-Speed	recording
		speed or card is formatted.
Burst])	conditions	••The focus, zoom, exposure, White Balance,
		shutter speed, and ISO sensitivity are all fixed
		to the settings for the first picture.
∗2	Complies with	••The burst of still pictures can be recorded even
		in low light conditions as the flash is used.
			5
([Flash	recording	••The focus, exposure, and flash level are all
	conditions	fixed to the settings for the first picture.
Burst])
		••Note on the available picture size settings (→89).
[OFF]	—	The burst function is released.	—

∗1 The number of burst pictures is limited by the picture-taking conditions and the type and/or status of the card used.

∗2 Only in [Program AE], [Aperture-Priority] and [Shutter-Priority] modes

- 88 - VQT4P14