Command, Channel/Region, 187 | Yamaha AW2400 specification

Command Editing Automix data In a Specified Region

1PARAMETERS ﬁeld

The following parameters can be selected for editing.

• FADER, CH ON, PAN, EQ buttons

...........Faders, Channel [ON] keys, pan, and

EQ operations.

•LIBRARY (CH, GATE, COMP, EQ) buttons

...........Channel library (CH), gate library (GATE), compressor library (COMP), and EQ library (EQ) recall.

•SCENE button .................Scene recall.

•EFF LIB 1–4 buttons .......Effect 1–4 library recall.

•AUX/ON 1–4 buttons .......AUX 1–4 send level and on/off switching.

•EFF/ON 1–4 buttons........Effect 1–4 send level and on/off switching.

BCOMMAND

Displays the currently selected edit command.

CChannel/Region

The channel and region to which the edit command will apply are speciﬁed here. The display will change according to the command selected in B.

HINT

•The channel selection will be ignored when editing library, scene or effect settings.

DEXECUTE button

The selected edit command is executed when the cur- sor is moved to this button and the [ENTER] key is pressed.

2 Move the cursor to the button in the PARAMETERS ﬁeld corresponding to the parameter to be edited, and press the [ENTER] key.

Multiple parameters can be selected.

3 Move the cursor to the COMMAND ﬁeld and use the [DATA/JOG] dial or the [INC]/[DEC] keys to select a command, then press the [ENTER] key.

The following commands can be selected.

•ERASE........ Erase all occurrences of the speciﬁed parameter(s) in the speciﬁed region.

•COPY.......... Copy all occurrences of the speciﬁed parameter(s) in the speciﬁed region to the speciﬁed position in the speciﬁed destination channel.

•MOVE.......... Move all occurrences of the speciﬁed parameter(s) in the speciﬁed region to the speciﬁed position in the speciﬁed destination channel. The original parameters will be erased.

The display will change according to the selected edit command as follows.

●When the ERASE command is selected:

1The target channel can be selected from the following.

•IN 1–16 ....... Input channels 1–16

•TR 1–24 ...... Track channels 1–24

•RTN 1–4...... Effect return channels 1–4

•BUS 1, 2 ..... Bus master channels 1, 2

•AUX 1–4...... AUX send master channels 1–4

•EFF 1–4 ...... Effect send master channels 1–4

•ST ............... Stereo output channel

•ALL ............. All channels

BThe start point of the region to be edited is speciﬁed in counter format.

CThe end point of the region to be edited is speciﬁed in counter format.

●When the COPY or MOVE command is selected:

A			B
			C
			C


	D	E
	1 Speciﬁes the source channel for the copy
	or move operation.
	The channels that can be selected are the same as
	for ERASE, above.
	B The start point of the source region for the			19
	copy or move operation speciﬁed in			19
	counter format.			Automix
	C The end point of the source region for the			Automix
	C The end point of the source region for the

copy or move operation is speciﬁed in counter format.

D Speciﬁes the destination channel for the copy or move operation.

Depending on the source channel for copy or move operation, the channels that can be selected vary.

E The start point of the destination region for the copy or move operation speciﬁed in counter format.

AW2400 Owner’s Manual

Yamaha AW2400 owner manual Command, Channel/Region, When the Erase command is selected, 187

Models: AW2400