Yamaha AW2400 owner manual Editing Effects, Name, Type, Used AS, 121

Editing Effects

Editing Effects

The AW2400 internal effect parameters can be edited to create precisely the effect your music requires.

1 Referring to the instructions in “Recalling Effect Library settings” on page 116, recall an effect library preset that is based on the effect type you want to use.

2 Make sure that the Selected Channel sec- tion [EFFECT] key is engaged and its indi- cator is lit.

3 Make sure that the EFFECT screen selected in step 1 is showing.

Selected Channel knobs 1–4 correspond to EFFECT screens 1–4. Press the appropriate knob to call the desired screen.

4 Press the Display section [F3] key to access and edit the effect parameters.

The EFFECT screen FX Edit page will appear. This page contains the following items.

A B C D

E

F

1NAME

Indicates the name of the currently selected effect.

BTYPE

Indicates the type of the currently selected effect.

NOTE

•You cannot change the effect type via this page. If you want to use a different type you will need to recall a library setting that uses the desired effect type.

CMIX BALANCE field

•BYPASS button............Switches effect bypass on/

off.

•MIX BALANCE knob ....Sets the balance between the effect and direct sig- nals. 0% produces direct sound only, while 100% produces effect sound only.

DUSED AS

Indicates how this effect is being used. “EFF1”– “EFF4” indicate that the effect is internally connected to the mixer section via send/return. If the effect is inserted into a specific channel the name of the chan- nel into which the effect is inserted will be shown (e.g., “INPUT 1”).

ELevel Meter

Displays the effect input or output level. Select input (IN) or output (OUT) via the button above the meters.

FParameter page

In this area you can edit the various effect parameters. The content and range of the parameters will depend on the currently selected effect type.

5 Move the cursor to the effect parameter that you want to edit, and use the [DATA/JOG] dial or [INC]/[DEC] keys to edit the value.

Depending on the effect type, this area may be used to show multiple parameter pages. In this case repeatedly press the CURSOR [ ] key to access the parameter page that contains the parameter you want to edit.

6 To switch effect BYPASS on/off, move the cursor to the BYPASS button and press the [ENTER] key.

HINT

•Edited effect settings can be stored in the effect library (→ p. 123).

14

Effects

AW2400 Owner’s Manual

121