Yamaha AW2400 owner manual Recalling Effect Library settings, Effect screen will appear, 116

Recalling Effect Library settings

Recalling Effect Library settings

The first step in using an effect is to recall a preset from the effect library that uses the required effect.

HINT

•The effect type for a recalled effect library preset cannot be changed. For this reason even when you want to program an effect from scratch it is necessary to begin by recalling an effect library preset that includes the effect type you want to use.

14

Effects

1 Press the Selected Channel section [EFFECT] key so that its indicator lights.

The EFFECT screen will appear.

2 Press Selected Channel knob 1–4, corre- sponding to the effect processor to which you want to load the effect.

While the EFFECT screen is showing Selected Chan- nel knobs correspond to effect processors 1–4. So, for example, the EFFECT1 screen will be selected if you press Selected Channel knob 1.

HINT

•If the AUTO DISPLAY function is set to OFF (→ p. 211), the EFFECT screen will not appear automatically when step 1, above, is performed. In this case press one of the Selected Channel knobs (1–4) will cause the corresponding EFFECT screen to appear.

3 Press the Display section [F4] key to call the FX Lib. Page.

You can select the effect library preset to be loaded into the effect processor selected in step 2 via this page.

List RECALL button

HINT

•Library numbers 1–43 contain pre-programmed read-only effect presets.

•Refer to “Effect Library Operations” on page 122 for details on the effect library RENAME, STORE, and CLEAR functions.

4 Move the cursor to the List, and use the [DATA/JOG] dial or [INC]/[DEC] keys to select the library setting to be recalled.

The setting highlighted by a dotted frame is currently selected for recall.

5 Move the cursor to the RECALL button and press the [ENTER] key.

A popup window confirming the recall operation will appear.

HINT

•Pressing the [F1] key while holding the Display section [SHIFT] key has the same effect as the RECALL button.

6 To actually recall the selected setting move the cursor to the OK button and press the [ENTER] key.

The library setting will be recalled.

116

AW2400 Owner’s Manual