Using the Recall Safe function

Using the Recall Safe function

You can specify that specific faders or specific channels will be excluded from Recall operations when the scene is changed either manually or from an external MIDI device. This function is called “Recall Safe.”

This is convenient, for example, if you are performing a mixdown while switching scenes, but want to control specific channels manually.

17

Scene Memory

1 Call the RCL Safe page by either pressing the [SCENE] key as many times as neces- sary, or by pressing the [F2] key after pressing the [SCENE] key.

The SCENE screen RCL Safe page will appear.

D

A

B

C

1RCL.SAFE button

This button switches Recall Safe between ENABLE and DISABLE. Move the cursor to this button and press the [ENTER] key to switch to either ENABLE or

DISABLE.

HINT

Pressing the [F1] key while holding the Display section [SHIFT] key has the same effect as the RCL.SAFE button.

BMODE field

The recall safe parameters can be selected from the following:

ALL button ...........This prevents all parameters in the scene from being recalled. The entire scene is “recall safe” and no change will occur if it is inadvertently recalled.

FADER button......Only the fader settings will not

be recalled.

ON button.............Only the [ON] key settings will not be recalled.

HINT

Both the FADER and ON buttons can be on at the same time.

When the ALL button is turned on the FADER and ON buttons are automatically turned off.

CEFFECT button

Turn this button on to prevent recall (recall safe) of the effect settings. The button will appear inverted when on.

DCHANNEL field

Selects the recall safe channels. The mix parameters of selected channels will not be recalled.

The CHANNEL field buttons correspond to the fol- lowing channels.

• INPUT

Input channels 1–16

EFFECT RETURN ..... Effect Return channels 1–4

• TRACK

Track channels 1–24

• BUS

Bus master 1, 2

• AUX

AUX send master 1–4

EFFECT SEND .......... Effect send master 1–4

• STEREO

Stereo output channel

HINT

All CHANNEL field buttons can be cleared (de-selected) by pressing the [F2] key while holding the Display section [SHIFT] key.

2 Select the parameter(s) or channel(s) that you want to set to Recall Safe, and activate the corresponding button(s).

3 Move the cursor to the RCL.SAFE button and press the [ENTER] key.

Recall Safe has now been enabled. The selected parameter(s) and/or channel(s) will not be affected by scene recall operations until you change this setting.

HINT

• The RCL Safe page settings are shared by all songs.

NOTE

• Effect return settings are not affected by Recall Safe.

162

AW2400 Owner’s Manual

Page 162
Image 162
Yamaha AW2400 owner manual Using the Recall Safe function, 162