About the CD-ROM included with the AW2400

About the CD-ROM included with the AW2400

Special Notices

The software and this owner’s manual are the exclusive copyrights of Yamaha Corporation.

Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer.

Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software.

This disk is a CD-ROM. Do not attempt to play the disk on an audio CD player. Doing so may result in irrepara- ble damage to your audio CD player.

Future upgrades of application and system software and any changes in specifications and functions will be announced separately.

Contents of the CD-ROM

The included CD-ROM contains a backup file that you can use to restore the AW2400 to its factory-set condition, setting files that let you use the AW2400’s MIDI Remote function with various DAW software, and a USB MIDI driver that is necessary to allow MIDI message transmis- sion and reception via the USB connector.

Folder/

Software name

Contents

file name

 

 

 

 

 

AW24_000.TAR

 

Backup file for restoring the

Demo song

internal hard disk to its fac-

 

 

tory-set condition.

 

 

 

 

Cubase/Nuendo

Setting file for remotely con-

 

trolling the Cubase/Nuendo

 

remote setup file

 

software from the AW2400.

 

 

 

 

 

Remote

 

Setting file for remotely con-

Logic preference file

trolling the Logic software

 

 

from the AW2400.

 

 

 

 

SONAR template file

Setting file for remotely

 

controlling the SONAR soft-

 

(Windows only)

 

ware from the AW2400.

 

 

 

 

 

 

 

Driver file for exchanging

USBdrv_

Yamaha USB MIDI

MIDI messages between

Driver

the AW2400 and a com-

 

 

 

puter via a USB cable.

 

 

 

Appendix

Installing USB MIDI driver

If you are connecting the AW2400 to your computer via a USB cable for MIDI message transmission and reception, you need to install the Yamaha USB MIDI driver.

System Requirements

OS: Windows XP Professional/Home Edition SP1 or higher, or Mac OS X 10.3 or higher

Installing on Windows XP

1 Start your computer to launch Windows, then log in as Administrator.

2 Click the [Start] button, and then click [Con- trol Panel].

If the control panel appears as “Pick a category”, click “Switch to Classic View” in the upper left of the win- dow. All control panels and icons will be displayed.

3 Go to [System Hardware] [Driver signa- tures] [Driver signature options], select “Ignore — Install software without asking for confirmation,” and then click [OK].

4 Click [OK] to close the “System Properties” window, and then click the Close button to close the “Control Panel” window.

5 Insert the included CD-ROM into the CD-ROM drive.

6 First, make sure the POWER switch on the AW2400 is set to STANDBY, then use a USB cable to connect the USB connector of the computer to the USB connector of the AW2400. When the AW2400 is turned on, the computer automatically displays the “Found New Hardware Wizard.”

7 If the “Can Windows connect to Windows Update to search for software?” is displayed, select “No, not this time”, and then click [Next].

8 Select “Install software automatically (recom- mended) (I),” and then click [Next].

The system starts the installation.

NOTE

• Some computers may take a few minutes to show this screen.

266

AW2400 Owner’s Manual

Page 266
Image 266
Yamaha AW2400 owner manual Special Notices, Contents of the CD-ROM, Installing USB Midi driver