Yamaha AW2400 owner manual Accessing a screen/page, Switching a button on/off, Press the Enter key

Basic operation of the AW2400

Accessing a screen/page

When you want to edit an internal setting of the AW2400, or to edit a parameter that cannot be operated by a fader or knob on the top panel, you will need to access the desired screen and page.

1 Press the key or knob for the desired screen.

The keys and knobs of various sections listed below have their own screens, and the corresponding screen will be displayed when you press a key or knob.

•All keys in the Work Navigate section

•All keys in the Quick Navigate section

•The [METER] key in the Display section

•The [VIEW]/[DYN]/[AUX]/[EFFET]/[PAN/EQ] keys of the Selected Channel section

•All knobs of the Selected Channel section

•All keys of the Scene/Automix/USB section

•The [REMOTE] key of the Layer section

•The [SOUND CLIP] key of the Locate section

HINT

•Press a SELECTED CHANNEL knob after pressing the SELECTED CHANNEL [DYN], [AUX], [EFFECT, or [PAN/EQ] key to access the related display screen.

•When you switch screens, the page that was last used in that screen will be displayed.

2 Use the [F1]–[F4] keys to select different pages within a screen.

The [F1]–[F4] keys correspond to the tabs as follows.

[F1] key [F2] key [F3] key [F4] key

HINT

•You can access the pages in sequence by repeatedly press- ing the key referred to in step 1, above.

Switching a button on/off

Here’s how to switch a button in the screen on/off.
	Use the [CURSOR] keys to		2
1 move the cursor to the
	desired button in the screen.		AW2400
2 Press the [ENTER] key.
	The button will be switched on/off.		the
	If you move the cursor to a button
			Introducing
	that executes a specific function and
	then press the [ENTER] key, that
	function will be executed.
	Editing a value in the display
Here’s how to edit the value of a knob or parameter shown
in the display.
1 Use the [CURSOR] keys to
	move the cursor to the
	desired knob or parameter
	value.
2 Turn the [DATA/JOG] dial or
	press the [INC]/[DEC] keys to
	edit the value.
	Using Additional Function Buttons
When an		mark appears in the lower left corner of the
display the tabs shown along the bottom of the display can
be switched to provide additional functions.
1 Press the [SHIFT] key when any screen with
	an	mark in the lower left corner is

showing.

The additional function buttons will appear in place of the tabs along the bottom of the display while the [SHIFT] key is held.

Additional Function Buttons

2 While holding the [SHIFT] key press the [F1]–[F4] button to execute the correspond- ing function.

AW2400 Owner’s Manual

31