Yamaha AW2400 owner manual System button, Restore button, 179, Restoring songs

Restoring songs

This page contains the following items.

1List

This area lists the data that has been backed up on the CD-R/RW media. The symbols at the right of the list indicate whether an item of data has been selected (●) or disabled () for restore.

NOTE

• The maximum number of songs that can be displayed is 100.

BSORT box

Changes the order of the songs displayed in the song list. Operation is the same as for the Song List page (→ p. 170).

CALL SET button

Move the cursor to this button and press the [ENTER] key to select all songs in the list to be restored. Press- ing the [F1] key whiled holding the Display section [SHIFT] key has the same affect as the ALL SET but- ton.

DALL CLEAR button

Move the cursor to this button and press the [ENTER] key to deselect all songs so that they won’t be restored. Pressing the [F2] key whiled holding the Display sec- tion [SHIFT] key has the same affect as the ALL CLEAR button.

ESYSTEM button

Selects the system data (AW2400 settings you make in the UTILITY screen) for restoring.

FRESTORE button

Restores of the selected song(s). Pressing the [F4] key whiled holding the Display section [SHIFT] key has the same affect as the RESTORE button.

4 Make sure the cursor is in the list area, use the [DATA/JOG] dial to select the song you want to restore, then press the [ENTER] key.

The symbol at the right will change to the (●) symbol, indicating that this song data has been selected for restoring.

If you turn on the ALL SET button, all data shown in the list will be selected in one step.

5 If you want to restore the system data, move the cursor to the SYSTEM button and press the [ENTER] key.

The button will be turned on, and the system data will be selected for restoring.

6 To execute the restore operation, move the cursor to the RESTORE button and press the [ENTER] key.

A popup window will ask you to confirm the opera- tion.

7 Move the cursor to the OK button if you want to execute the restore operation (or to the CANCEL button if you decide not to restore), and press the [ENTER] key.

The current song will be saved automatically, and the restore operation will begin.

A popup window will indicate the progress of the restore operation. When the operation is finished, you will return to step 3.

If the backup occupied more than one CD-R/RW disc, a message of “Exchange Next Media #XXX” (where

XXXis a number) will be displayed during the restore process. Exchange the CD-R/RW media for the media of the corresponding number. Then move the cursor to the OK button and press the [ENTER] key.

NOTE

•When a song with the same name already exists, the name of the restored song will automatically be changed. For exam- ple, if “001_Song” already exists, the song name will be altered as in: “001_Song0”, “001_Song1” ... etc.

18

Song management

AW2400 Owner’s Manual

179