Yamaha AW2400 owner manual Editing the song name, Song screen Setting page will appear, 169

Managing Your Songs

5 Select the buttons of the items you want to carry over from the current song, move the cursor to the OK button, and press the [ENTER] key.

The NAME EDIT popup window will appear, allow- ing you to enter a name for the song.

6 Assign a name to the song (for details on assigning a name → p. 32).

NOTE

•A new song cannot be given the same name as an existing song.

7 To create the new song, move the cursor to the OK button and press the [ENTER] key.

A new song will be created, and you will return to the SONG screen Song List page.

HINT

•If you move the cursor to the CANCEL button (instead of the OK button) and press the [ENTER] key, you will return to the SONG screen Song List page without creating a new song.

•You may also edit the song name later.

■Editing the song name

Here’s how to edit the song name that is assigned when you create a new song.

NOTE

•This setting applies only to the current song. Before you perform this procedure, load the song for which the name is to be edited.

1Call the Setting page by either pressing the Work Navigate section [SONG] key as many times as necessary, or by pressing the [F2] key after pressing the [SONG] key.

The SONG screen Setting page will appear.

2To edit the song name, move the cursor to the RENAME button and press the [ENTER] key.

The NAME EDIT popup window will appear, allow- ing you to edit the song name.

3 Enter the new name. Then move the cursor to the OK button and press the [ENTER] key.

The new name will be applied, and the popup window will close. (For details on inputting a name → p. 32)

18

Song management

AW2400 Owner’s Manual

169