Yamaha AW2400 owner manual Using User-defined Remote function, USER1 USER2 USER3 USER4, 206

Using the MIDI Remote function

●XG 1–16

●XG 17–32

●XG 33–48

●XG 49–64

These presets let you use the AW2400 as a volume con- troller for an XG tone generator. Each preset will control the XG-compatible tone generator’s parts 1–16, 17–32, 33–48, and 49–64 respectively.

•[ON] key operations will switch the part on/off.

•Fader operations will control the volume of the part.

●USER1

●USER2

●USER3

●USER4

These 4 presets can be set up by the user. Refer to “Using User-defined Remote function”.

BTRANSPORT field

Select one of the following to specify how the transport section keys will function while using the MIDI Remote function.

•NORMAL button ...... The transport keys will perform their normal functions: play, stop, or locate etc. for the current song. MTC/MMC/MIDI Clock messages will be transmitted and received as specified in the MIDI screen Setting 2 page.

•LOCAL button.......... The transport keys will play, stop, or locate the current song. How- ever, MTC/MMC/MIDI Clock messages will not be transmitted or received.

•REMOTE button....... The transport keys will not oper- ate the recorder, but will only transmit the MIDI messages that have been preset for each key.

HINT

•These settings will also apply if you use a foot switch to operate the song transport.

CON field

DFADER field

This field is used when setting up a user-defined preset.

20

MIDI

Using User-defined Remote function

The REMOTE screen 1–12 page and 13–16 page let you assign your own MIDI messages to each fader and [ON] key.

To call the REMOTE screen 1–12 page (or 13–16 page) press the Layer section [REMOTE] key as many times as necessary, or press the [F1] key (or [F2] key) after press- ing the [REMOTE] key.

NOTE

•USER1–USER4 must be selected in the MODE box in order to set up user-defined assignments.

B C D E

A

1Fader/[ON] key function name

Displays the name that is assigned to the currently dis- played fader or [ON] key.

BRENAME button

Edits the name that is assigned to the fader/[ON] key. Move the cursor to the button and press the [ENTER] key, and the NAME EDIT popup window will appear.

CLATCH/UNLATCH button

Selects one of the following types of operation for the [ON] keys.

•LATCH............. The setting will alternate on/off each time you press the [ON] key.

MIDI data transmitted				MIDI data
	(SW=7F)		transmitted (SW=00)
off		on			off

206

AW2400 Owner’s Manual