Yamaha AW2400 Storing Automix settings, Recalling Automix settings, Erasing Automix settings, 191

Automix Library Operation

Storing Automix settings

Storing the current Automix data to the Automix library.

NOTE

•If you select and store to a library number that contains previously- stored data, the previous data will be overwritten.

1Call the AUTOMIX screen Library page by either pressing the [AUTOMIX] key as many times as necessary, or by pressing the [F4] key after pressing the [AUTOMIX] key.

2Use the [DATA/JOG] dial or [INC]/[DEC] keys to select the library number to which the data is to be stored.

The data highlighted by a dotted frame is currently selected for storage.

3Move the cursor to the STORE button and press the [ENTER] key.

The NAME EDIT popup window will appear.

HINT

•Pressing the [F2] key while holding the Display section [SHIFT] key has the same effect as the STORE button.

4 As required, enter a name for the selected Automix data, move the cursor to the OK button, and press the [ENTER] key (refer to page 32 for details on name entry).

The automix setting will be stored.

Recalling Automix settings

Recalling stored Automix data from the library.

1 Call the AUTOMIX screen Library page by either pressing the [AUTOMIX] key as many times as necessary, or by pressing the [F4] key after pressing the [AUTOMIX] key.

2 Use the [DATA/JOG] dial or [INC]/[DEC] keys to select the library data to be recalled.

The data highlighted by a dotted frame is currently selected for recall.

3 Move the cursor to the RECALL button and press the [ENTER] key.

A popup window confirming the recall operation will appear.

HINT

•Pressing the [F1] key while holding the Display section [SHIFT] key has the same effect as the RECALL button.

4 To actually recall the selected data move the cursor to the OK button and press the [ENTER] key.

The library data will be recalled.

Erasing Automix settings

Erasing unneeded Automix data from the library.

NOTE

•Erased Automix data cannot be recovered. Use this function with caution.

1Call the AUTOMIX screen Library page by either pressing the [AUTOMIX] key as many times as necessary, or by pressing the [F4] key after pressing the [AUTOMIX] key.

2Use the [DATA/JOG] dial or [INC]/[DEC] keys to select the Automix data to be erased.

The data highlighted by a dotted frame is currently selected to be erased.

3Move the cursor to the CLEAR button and press the [ENTER] key.

A popup window confirming the clear operation will appear.

HINT

•Pressing the [F3] key while holding the Display section [SHIFT] key has the same effect as the CLEAR button.

4 To actually erase the selected data move the cursor to the OK button and press the [ENTER] key.

19

Automix

AW2400 Owner’s Manual

191