Yamaha AW2400 owner manual Reverb HALL, Reverb ROOM, Reverb STAGE, Reverb Plate, Early REF, 245

Effects Parameters

Effects Parameters

■REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE

One input, two output hall, room, stage, and plate reverb simulations, all with gates.

	Parameter	Range	Description
REV TIME		0.3–99.0 s	Reverb time
INI. DLY		0.0–500.0 ms	Initial delay before reverb begins
HI. RATIO		0.1–1.0	High-frequency reverb time ratio
LO. RATIO		0.1–2.4	Low-frequency reverb time ratio
DIFF.		0–10	Reverb diffusion (left–right reverb spread)
DENSITY		0–100%	Reverb density
E/R DLY		0.0–100.0 ms	Delay between early reflections and reverb
E/R BAL.		0–100%	Balance of early reflections and reverb (0% = all reverb, 100% = all early reflections)
HPF		THRU, 21.2 Hz–8.00 kHz	High-pass filter cutoff frequency
LPF		50.0 Hz–16.0 kHz, THRU	Low-pass filter cutoff frequency
GATE LVL		OFF, -60 to 0 dB	Level at which gate kicks in
ATTACK		0–120 ms	Gate opening speed
HOLD		*1	Gate open time
DECAY		*2	Gate closing speed
*1.	0.02 ms–2.13 s (fs=44.1 kHz), 0.02 ms–1.96 s (fs=48 kHz)
*2.	6 ms–46.0 s (fs=44.1 kHz), 5 ms–42.3 s (fs=48 kHz)

■EARLY REF.

One input, two output early reflections.

Parameter	Range	Description
TYPE	S-Hall, L-Hall, Random,	Type of early reflection simulation
	Revers, Plate, Spring
ROOMSIZE	0.1–20.0	Reflection spacing
LIVENESS	0–10	Early reflections decay characteristics (0 = dead, 10 = live)
INI. DLY	0.0–500.0 ms	Initial delay before reverb begins
DIFF.	0–10	Reflection diffusion (left–right reflection spread)
DENSITY	0–100%	Reflection density
ER NUM.	1–19	Number of early reflections
FB.GAIN	-99 to +99%	Feedback gain
HI. RATIO	0.1–1.0	High-frequency feedback ratio
HPF	THRU, 21.2 Hz–8.00 kHz	High-pass filter cutoff frequency
LPF	50.0 Hz–16.0 kHz, THRU	Low-pass filter cutoff frequency

■GATE REVERB, REVERSE GATE

One input, two output early reflections with gate, and early reflections with reverse gate.

Parameter	Range	Description
TYPE	Type-A, Type-B	Type of early reflection simulation
ROOMSIZE	0.1–20.0	Reflection spacing
LIVENESS	0–10	Early reflections decay characteristics (0 = dead, 10 = live)
INI. DLY	0.0–500.0 ms	Initial delay before reverb begins
DIFF.	0–10	Reflection diffusion (left–right reflection spread)
DENSITY	0–100%	Reflection density
HI. RATIO	0.1–1.0	High-frequency feedback ratio
ER NUM.	1–19	Number of early reflections	Appendix
FB.GAIN	-99 to +99%	Feedback gain
HPF	THRU, 21.2 Hz–8.00 kHz	High-pass filter cutoff frequency
LPF	50.0 Hz–16.0 kHz, THRU	Low-pass filter cutoff frequency

AW2400 Owner’s Manual

245