Writing audio data

7 Move the cursor to the WRITE button and press the [ENTER] key.

A popup window will ask you to confirm.

HINT

Pressing the [F4] key while holding the Display section [SHIFT] key has the same effect as the WRITE button.

8 To begin writing the disc, move the cursor to the OK button and press the [ENTER] key.

A popup window will indicate “CD Writing...” while data is being written to the disc. When writing is com- pleted, a popup window will ask you whether you want to finalize.

NOTE

A “BUFFER UNDERRUN!” error message will appear if a buffer underrun occurs while writing. In this case, either decrease the writing speed to 4x or set the UNDERRUN PROTECT button to ENABLE (p. 215).

If you enabled the write test in “Basic settings for the CD-RW drive” (p. 215), a write test will be performed before the data is actually written. An error message will appear if a problem occurs during the write test.

Copy-prohibit data will automatically be written into the CD that is created.

9 To finalize the disc, move the cursor to the

Creating

OK button and press the [ENTER] key.

If you do not want to finalize the disc, move the cursor

 

 

to the CANCEL button and press the [ENTER] key.

an audio CD

This completes the writing process.

 

22

Writing Disc At Once

Here’s how to use the Disc At Once method to write stereo tracks from songs saved on the hard disk to CD-R/RW media. Use this method if you do not want to create silence between each track of the CD, or if you want to write a single song divided into multiple tracks on the CD.

1 Make sure that the appropriate virtual track is selected for the stereo track of the song(s) you want to write.

2 If you want to divide the song into CD tracks at the marker locations specified within the song, check that markers have been set at the appropriate locations.

3 Call the CD screen Write page by either pressing the Work Navigate section [CD] key as many times as necessary, or by pressing the [F1] key after pressing the [CD] key.

4 Move the cursor to DISC AT ONCE and press the [ENTER] key.

The CD-RW disc inserted in the drive will automati- cally be checked.

HINT

If data has already been written on the CD-RW disc that you insert, a popup window will appear immediately after step 4 asking whether you want to erase the data. Move the cursor to the OK button if you want to erase the entire disc, or to the CANCEL button if you want to cancel execution. Then press the [ENTER] key.

5 Move the cursor to the ADD button and press the [ENTER] key.

The track list will show information (track number/ song name/size of the stereo track) for the song that will be written to track 1 of the CD.

HINT

When you move the cursor to the ADD button and press the [ENTER] key, a new song will be added following the existing songs.

By using the INSERT button instead of the ADD button, you can insert a new song immediately before the song that is selected in the list.

You can use the DELETE button to delete the currently selected song from the track list.

218

AW2400 Owner’s Manual

Page 218
Image 218
Yamaha AW2400 owner manual Writing Disc At Once, Move the cursor to the Write button and press the Enter key, 218