Display message list
263
Appendix
AW2400 Owner’s Manual

■Messages

A/B POINTS NOT FOUND Repeat Playback cannot be performed because A/B points are not specified.
AUTOMIX ABORTED! Automix recording has been aborted.
AUTOMIX DISABLED! Automix is currently disabled. Please set to ENABLE.
AUTOMIX MEMORY FULL! Not enough memory available for automix.
AUTOMIX RUNNING! That operation cannot be performed while automix is running.
CANNOT DEFEAT MUTE Mute cannot be disengaged because the simultaneous playback limit will be
exceedced.
CANNOT REDO Redo (re-execution of an operation) is not possible.
CANNOT SET MARK It is not possible to specify a marker at an already-specified position.
CANNOT UNDO Undo (cancellation of an operation) is not possible.
CD PLAY MODE NOW Since the AW2400 is in CD Play mode, this operation cannot be executed.
CH. PARAMETER INITIALIZED The mixer parameters of the channel have been initialized.
DIFFERENT TC FRAME TYPE MTC of a different frame type than the internal setting is being received.
DIGITAL-ST-IN REC PROHIBIT. Recording of digital input signals is prohibited.
DISK BUSY!! The reading speed of the internal hard disk is not fast enough, or the reading
speed has slowed down because the recorded data has become fragmented.
DISK FULL!! There is insufficient space on the internal hard disk.
IN/OUT POINTS NOT FOUND Auto-punch recording cannot be performed because in/out points are not speci-
fied.
IN/OUT POINTS REVERSE ORDER In/out points are set in wrong order.
IN/OUT POINTS TOO CLOSE The auto punch-in/out interval is too short. It cannot be set less than approxi-
mately 100 msec.
LOCATE POINT ERASED The locate point has been erased.
LOCATE POINT SET The locate point has been set.
MARK POINT ERASED The marker has been erased.
MARK POINT SET The marker has been set.
MIDI IN: DATA FRAMING ERROR! Invalid MIDI data may have been received.
MIDI IN: DATA OVERRUN! Invalid MIDI data may have been received.
MIDI: RX BUFFER FULL! Receiving more MIDI data than it can handle.
MIDI: TX BUFFER FULL! Attempting to transmit more MIDI data than it can handle.
MTC SLAVE MODE NOW Since the AW2400 is in MTC Slave mode, this operation cannot be executed.
NO DATA TO COPY! There is no data to be copied.
NO MARK LEFT The allowable number of marks has been exceeded.
NOTHING TO UNDO! Not data available for undo.
RECORD TRACK NOT SELECTED Recording cannot be performed because you have not selected a record track.
RECORDER BUSY! The operation cannot be executed because the recorder is operating.
RECORDER RUNNING NOW Since the recorder is recording or playing, this operation cannot be executed.
REDO COMPLETED Redo (re-execution of the previous operation) has been completed.
REPEAT POINTS TOO CLOSE The repeat interval is too short. It cannot be set to less than one second.
SELECTED CH IS NONE. The selected channel is not available.
SET OVERWRITE! Please specify the automix parameters to be overwritten in the OVERWRITE
field.
SOUND CLIP MODE NOW Since the AW2400 is in Sound Clip mode, this operation cannot be executed.
STEREO TRACK PLAYBACK MODE Since the AW2400 is in Stereo Track Playback mode, this operation cannot be
executed.
Display message list