Yamaha AW2400 Channel Library Operation, Calling the Channel Library screen, Eq/Comp, 108

Channel Library Operation

Channel Library Operation

The mix parameters for individual channels can be saved to and recalled from dedicated libraries as required. This is particularly handy when you want to use the settings made for one channel in one or more other channels as well. Library numbers 0–1 contain read-only data for channel ini- tialization, while numbers 2–64 can be used save and recall your own data. The following param- eters can be saved to the channel library.

• Channel on/off	• Fader position
• Channel attenuator	• AUX bus 1–4 pre-fader/post-fader setting
• EQ on/off	• AUX bus 1–4 send level
• EQ parameter settings	• Effect bus 1–4 pre-fader/post-fader setting
• Dynamics processor on/off	• Effect bus 1–4 send level
• Dynamics processor parameter settings

NOTE

•Pan, effect parameter, and the INSERT EFF settings displayed in the CH VIEW screen View page are not saved to the channel library.

12

Channel Operation

Calling the Channel Library screen

Channel library save and recall operations are carried out via the CH VIEW screen Library page.

To call this page press the Selected Channel section [VIEW] key as many times as necessary, or press the [F2] key after pressing the [VIEW] key.

This page contains the following items.

C

A

B

F E D

1Selected channel

Displays the selected channel.

BEQ/COMP

Displays the EQ and compressor settings for the selected channel.

CInput/Output meter

Displays the input levels for the selected channel and adja- cent odd-even channel pairs. When the stereo output chan- nel is selected, however, this meter displays the L/R output channel levels.

DButtons

These buttons execute the RENAME, RECALL, STORE, and CLEAR functions.

EList

A list of all the settings stored in the library. The row high- lighted by a dotted frame is the setting currently selected for operation. An icon indicates read-only library set- tings.

FSOURCE CHANNEL

Displays the source channel for the settings shown in the library list. “GENERAL” appears for preset data.

NOTE

•When data cannot be recalled to the selected channel the “Recall Channel Data Conflict!” error message will appear.

108

AW2400 Owner’s Manual