Yamaha AW2400 MMC Fast Forward, MMC Record Strobe, MMC Record Exit, MMC Locate Target, 275

MIDI data format

5.13.1.4. MMC FAST FORWARD

< Transmission >

This message is transmitted with a device number of 7F when the FF key is pressed and the Cue mode is engaged.

< Reception >

If the AW2400 is operating as an MMC Slave, the transport will begin fast-forward when this message is received with a matching device number or a device number of 7F.

STATUS	11110000	F0	System Exclusive Message
ID No.	01111111	7F	Real Time System Exclusive
Device ID	0ddddddd	dd	Destination (00-7E, 7F:all call)
Command	00000110	06	Machine Control Command (mcc) sub-id
	00000110	04	Fast Forward (MCS)
EOX	11110111	F7	End Of Exclusive

5.13.1.5. MMC REWIND

< Transmission >

This message is transmitted with a device number of 7F when the REWIND key is pressed and the Review mode is engaged.

< Reception >

If the AW2400 is operating as an MMC Slave, the transport will begin rewind when this message is received with a matching device number or a device number of 7F.

STATUS	11110000	F0	System Exclusive Message
ID No.	01111111	7F	Real Time System Exclusive
Device ID	0ddddddd	dd	Destination (00-7E, 7F:all call)
Command	00000110	06	Machine Control Command (mcc) sub-id
	00000101	05	Rewind (MCS)
EOX	11110111	F7	End Of Exclusive

5.13.1.6. MMC RECORD STROBE

< Reception >

This message is received if the AW2400 is operating as an MMC Slave and the device number matches or is 7F. If the transport is stopped, then recording will begin. If the transport is playing, then punch-in will occur.

STATUS	11110000	F0	System Exclusive Message
ID No.	01111111	7F	Real Time System Exclusive
Device ID	0ddddddd	dd	Destination (00-7E, 7F:all call)
Command	00000110	06	Machine Control Command (mcc) sub-id
	00000110	06	Record strobe
EOX	11110111	F7	End Of Exclusive

5.13.1.7. MMC RECORD EXIT

< Reception >

This message is received if the AW2400 is operating as an MMC Slave and the device number matches or is 7F. If the transport is recording, then punch-out will occur.

STATUS	11110000	F0	System Exclusive Message
ID No.	01111111	7F	Real Time System Exclusive
Device ID	0ddddddd	dd	Destination (00-7E, 7F:all call)
Command	00000110	06	Machine Control Command (mcc) sub-id
	00000111	07	Record Exit
EOX	11110111	F7	End Of Exclusive

5.13.1.8. MMC RESET

< Transmission >

This message is transmitted with a device number of 7F when song loading is finished.

< Reception >

This message is received if the AW2400 is operating as an MMC Slave and the device number matches or is 7F. MMC-related internal settings will be reset to the power-on state.

STATUS	11110000	F0	System Exclusive Message
ID No.	01111111	7F	Real Time System Exclusive
Device ID	0ddddddd	dd	Destination (00-7E, 7F:all call)
Command	00000110	06	Machine Control Command (mcc) sub-id
	00001101	0D	Reset
EOX	11110111	F7	End Of Exclusive

5.13.1.9. MMC LOCATE (TARGET)

< Transmission >

This message is transmitted with a device number of 7F when a locate-related key such as MARK SEARCH/IN/OUT is pressed, a FF/REW operation is performed, when the transport returns to the auto-punch pre-roll point, or when repeating.

< Reception >

This message is received if the AW2400 is operating as an MMC Slave and the device number matches. The transport will locate to the time code position specified within the command data.

STATUS	11110000	F0	System Exclusive Message
ID No.	01111111	7F	Real Time System Exclusive
Device ID	0ddddddd	dd	Destination (00-7E, 7F:all call)
Command	00000110	06	Machine Control Command (mcc) sub-id
	01000100	44	Locate
	00000110	06	byte count
	00000001	01	“target” sub command
	0hhhhhhh	hh	hour (Standard Time Code)
	0mmmmmmm	mm	minute
	0sssssss	ss	second
	0fffffff	ff	frame
	0sssssss ss sub-frame
EOX	11110111	F7	End Of Exclusive

Appendix

AW2400 Owner’s Manual

275