Plug-in Card Settings, Digital I/O card status, 228

Check the Status Of the Digital Input Signal • Plug-in Card Settings

•CATEGORY

Indicates the status of “Category Code Bit” included in the IEC958 Part 2 (S/PDIF-Consumer) format. This parameter can display the following values:

	Parameter values	Description
	General	Temporarily used.

	Laser Optical	Laser optical device

	D/D Conv	Digital - Digital converter and signal pro-
	D/D Conv	cessing device
		cessing device

	Magnetic	Magnetic tape device and magnetic disk
	Magnetic	device
		device

	D.Broadcast	Digital broadcast reception

	Instrument	Musical instrument, microphone, and
	Instrument	sources that generate string signals
		sources that generate string signals

	AD Conv	A/D converter
	AD Conv	(without copyright information)
		(without copyright information)

	AD Conv with (c)	A/D converter
	AD Conv with (c)	(with copyright information)
		(with copyright information)

	Solid Memory	Solid memory device

	Experiment	Experimental device

	Unknown	Unknown device

NOTE

•“AES/EBU” appears in the Category row when you are moni- toring IEC958 Part 3 (AES/EBU-Professional) format signals (that do not include Category Code Bit).

•COPY

Indicates the status of copy protection information included in the IEC958 Part2 (S/PDIF-Consumer) for- mat signals.

Parameter values	Description
OK	Copy allowed

Prohibit	Copy prohibited

B[DIGITAL STEREO IN] connector status

Indicates the status of the digital audio signal received at the [DIGITAL STEREO IN] connector.

CSLOT

When an I/O card is installed in the rear-panel slot a graphic symbol that indicates the type of card appears here. “NO CARD” will appear when no card is installed.

DDigital I/O card status

Displays the status of the digital audio signal received via a digital I/O card.

HINT

•The status of digital signals received via a digital I/O card is dis- played in odd/even channel pairs.