Yamaha AW2400 owner manual EQ Control via the Selected Channel section

150

4-band EQ

6 Move the cursor to the parameter that you want to edit, and use the [DATA/JOG] dial or the [INC]/[DEC] keys to adjust the value.

HINT

•If you press the [F1] (FLAT) key while holding the [SHIFT] key from the PAN/EQ screen EQ/Att. page, all G knobs for the currently selected channel will be set to 0.0dB (or OFF).

7 To switch the LOW band type, move the cur- sor to the LOW band Q knob and continue turning the [DATA/JOG] dial toward the left or right.

If you continue turning the Q knob toward the right, the Q knob value will indicate “L.SHELF,” and will switch to the shelving type.

If you turn the Q knob toward the left, the Q knob value field will change to a numerical value, and will switch to the same boost/cut type as the HI-MID and LO-MID bands.

If you continue turning the Q knob toward the left, the Q knob value field will indicate “HPF,” and the LOW band will function as a high-pass filter. If “HPF” is selected, you can use the LOW band G knob to switch the high-pass filter on/off.

8 To switch the HIGH band type, move the cursor to the HIGH band Q knob and con- tinue turning the [DATA/JOG] dial toward the left or right.

	If you continue turning the Q knob toward the right,
	the Q knob value will indicate “H.SHELF,” and will
	switch to the shelving type.
	If you turn the Q knob toward the left, the Q knob
	value field will change to a numerical value, and will
	switch to the same boost/cut type as the HI-MID and
	LO-MID bands.
16	If you continue turning the Q knob toward the left, the
	Q knob value field will indicate “LPF,” and the HIGH
Pan,	band will function as a low-pass filter. If “LPF” is
	selected, you can use the HIGH band G knob to switch
	the low-pass filter on/off.
EQ,
		HINT
and
		• EQ settings can also be recalled from the EQ library, or your
Dynamics
		own settings can be saved for later recall. See “EQ/Dynamics
		Processor Library Operation” on page 154 for details.
		• If boost in a particular band results clipping on the meters,
		use the ATT. knob to reduce the signal level.
Processing		• Selected Channel knobs 2, 3, and 4 also function while the
		PAN/EQ screen EQ/Att. page is showing.

■EQ Control via the Selected

Channel section

Using Selected Channel section knobs 2–4 to adjust EQ.

1 Use the Layer section, [INPUT SEL], [SEL], and [STEREO SEL] keys to select the chan- nel for which EQ is to be controlled.

2 Press the Selected Channel section [LOW], [LO-MID], [HI-MID], or [HIGH] key, according to the band you want to control.

The selected key’s indicator will light, as will the [PAN/EQ] key.

With the default settings the PAN/EQ screen will appear automatically. The display will not change if the UTILITY screen Preference page AUTO DIS- PLAY button is set to OFF.

3 Rotate Selected Channel knobs 2–4.

The parameters for the channels selected in step 1 and the band selected in step 2 will change accordingly.

The knobs control the following parameters.

Selected Channel	2	3	4
knobs 2–4
		Frequency
Parameters	Q	(center	Gain
		frequency)

If the UTILITY screen Preference page AUTO DISPLAY button is set to OFF, a popup window showing the current EQ settings will appear while Selected Channel knobs 2–4 are being operated.

AW2400 Owner’s Manual