Chapter 4

Listening to the demo song

When the AW2400 is shipped from the factory, its hard disk contains a demo song. This chapter explains how to load and play back the demo song.

Loading the demo song

Here’s how to load the demo song from the hard disk.

4

song

1 Press the Work Navigate section [SONG] key.

The SONG screen will appear, where you can save or load songs.

2 Call the Song List page by either pressing the [SONG] key as many times as neces- sary, or by pressing the [F1] key after pressing the [SONG] key.

In this page, you can select a song on the hard disk, and load or delete it.

B

A

1Song list

This area lists the songs that are saved on the hard disk. The line enclosed by the dotted frame in the cen- ter of the list indicates the song that is selected for operations. The highlighted line indicates the song that is currently loaded into the AW2400. (This is called the “current song.”)

NOTE

Each row of the list will display the song name, data size, bit depth (16/24 bit), and sampling rate (44.1/48 kHz).

BLOAD button

Loads the selected song.

3 Move the cursor to the song list, and then use the [DATA/JOG] dial or [INC]/[DEC] keys to select the song “The_Only_One.”

4 Move the cursor to the LOAD button in the screen, and press the [ENTER] key.

A popup window like the following will appear. This window asks you whether you want to save the current song.

5 Move the cursor to either YES (save the cur- rent song) or NO (don’t save the current song), and press the [ENTER] key.

The song data will be loaded, and “The_Only_One” will become the current song.

NOTE

If you select NO, any changes that you made to the current song since you last saved it will be lost.

“You’re the Only One”

© Timothy Akers

Listening to the demo

AW2400 Owner’s Manual

41

Page 41
Image 41
Yamaha AW2400 Listening to the demo song, Loading the demo song, Press the Work Navigate section Song key, Song list