Yamaha AW2400 owner manual Importing audio data from another song, Sort, 145

Importing audio data/WAV files

NOTE

•In the case of a Mixed Mode CD, the edit command you use will depend on the data you’re importing. Use IMPORT CD AUDIO to import audio data (CD-DA), or use IMPORT CD WAV to import a WAV file.

•You cannot import a WAV file whose bit depth or sample rate differs from the current song.

•When the import source is an audio CD or CD Extra disc and the song is 24-bit, the audio data will be automatically con- verted to 24-bit format during the import operation.

•When you move the cursor to the LISTEN button and press the [ENTER] key, there will be a slight time lag while the data is read from the CD before you hear it.

9 Move the cursor to the track list (file list), and use the [DATA/JOG] dial or the [INC]/ [DEC] keys to select the track or WAV file that you want to import.

If you’re using IMPORT CD WAV, and the is located at the line enclosed by the dotted line, you can press the [ENTER] key to move to the next lower level.

To move to the next higher level, move the cursor to

the and press the [ENTER] key.

10 If you’re using IMPORT CD AUDIO, use From Start/From End to specify the region that will be imported.

11 Use the To TR, To V.TR, and To Start fields to specify the track number, virtual track num- ber, and starting location into which the data will be imported.

NOTE

•If the import-destination contains data, it will be overwritten. Be careful not to overwrite important data by accident.

12 When you have finished making settings, move the cursor to the EXECUTE button and press the [ENTER] key.

A popup window will ask you to confirm the opera- tion.

13 To execute the import operation, move the cursor to the OK button and press the [ENTER] key.

Importing will begin. If you move the cursor to the CANCEL button and press the [ENTER] key, import- ing will be cancelled.

Importing audio data from another song

Here’s how you can import audio data from another song saved on the AW2400’s hard disk.

1 Call the EDIT screen Edit page by either pressing the Work Navigate section [EDIT] key as many times as necessary, or by pressing the [F1] key after pressing the [EDIT] key.

2 Move the cursor to the edit command field, and use the [DATA/JOG] dial or the [INC]/ [DEC] keys to select IMPORT TRACK.

3 Press the [ENTER] key to conform your choice of edit command.

The screen will change as follows.

A B C D E F

G	H	I
1 Song List
This area lists the songs that are saved on the
AW2400’s internal hard disk. In this list, select the
song that contains the track you want to import.			15
B Song name
C Song size			editing
D Song Bit Depth/Sampling Frequency
E Song Protect Status			and
F SORT			operations
Move the cursor to this box, and use the [DATA/JOG]
dial or the [INC]/[DEC] keys to choose the order in
which you want the songs in the list to appear.			Track
• NAME...........Song names in alphabetical order.

• SIZE .............Song size, from largest to smallest.

• OLD..............The order in which the songs were

saved, from newest to oldest.

G From TR/From V.TR

Here you can select the desired track number (1–24, ST) and virtual track number (1–8) of the import- source song.

AW2400 Owner’s Manual

145