Yamaha AW2400 Playing an audio CD, CD Play Mode button, Switches the CD Play function on/off, 222

Playing an audio CD

Playing an audio CD

The AW2400 CD Play function lets you play back a conventional audio CD or CD-R/RW media to which audio data has been written via the CD-RW drive.

HINT

•The CD Play function can also be used to play mixed-mode CDs (tracks 2 and above) and CD Extra CDs (1st session only).

•CD-R/RW discs can also be played prior to finalization.

Creating an audio CD

22

1 Call the CD screen Play page by either pressing the Work Navigate section [CD] key as many times as necessary, or by pressing the [F2] key after pressing the [CD] key.

In this page you can play back an audio CD inserted in the CD-RW drive.

A

B

C

1CD PLAY MODE button

Switches the CD Play function on/off.

BINPUT CH MUTE/MIX button

Use this button to specify whether the signals from input channels 1–16 will be output together with CD playback (MIX button), or whether only the CD signal will be output (MUTE button).

CList

Displays the tracks on the audio CD that is inserted in the CD-RW drive.

2 Insert the audio CD that you want to play into the CD-RW drive.

3 Move the cursor to the CD PLAY MODE but- ton and press the [ENTER] key.

The CD Play function will be activated, and the CD track data will be read.

HINT

•Pressing the [F1] key while holding the Display section [SHIFT] key has the same effect as the CD PLAY MODE but- ton.

4 To play the CD tracks, press the PLAY [ ] key. To stop, press the STOP [■] key.

During playback the audio output of the CD-RW drive will be sent directly to the stereo output channel. Use the STEREO fader to adjust the volume.

When the CD Play function is on, the transport section keys have the following functions.

				Key		Operation
PLAY [		] key				Play
STOP [■] key						Stop
REW [			] key/FF [		] key	Rewind/Fast-forward
						Select tracks
[DATA/JOG] dial						(Press the [ENTER] key
						to confirm the selection)
[	] key/[			] key		Select tracks

5 To exit the CD Play function, move the cur- sor to the CD PLAY MODE button and press the [ENTER] key.

NOTE

•The CD PLAY MODE button can be switched on/off only while CD playback is stopped.

•While the CD PLAY MODE button is on, the CD-RW drive will be locked and it will not be possible to eject the disc.

222

AW2400 Owner’s Manual