Yamaha AW2400 Inserting an Effect Into a Channel, Popup window includes the following items, 119

Inserting an Effect Into a Channel

Inserting an Effect Into a Channel

Effects can be directly inserted into the signal path of specified channels as follows.

1 Referring to the instructions in “Recalling Effect Library settings” on page 116, recall an effect library preset that is based on the effect you want to use.

2 Call the CH VIEW screen View page by either pressing the Selected Channel sec- tion [VIEW] key as many times as neces- sary, or by pressing the [F1] key after pressing the [VIEW] key.

The signal flow and mix parameters for each channel are displayed in this page.

3 Use the Layer section keys, [INPUT SEL] keys, [SEL] keys, or [STEREO SEL] key to select the channel into which the effect is to be inserted.

The signal flow for the selected channel will be dis- played.

To insert an effect that is to be used on just one instru- ment connected to the AW2400, for example, insert the required effect into the appropriate input channel.

The example diagram shows input channel 1 selected for effect insertion.

INSERT EFF

NOTE

•Effects cannot be inserted into the effect send master or effect return channels.

4 Move the cursor to the field to the right of INSERT EFF on the display and press the [ENTER] key.

A popup window allowing selection of the effect to be inserted as well as an I/O card channel to and from which the signal will be sent/received will appear.

The popup window includes the following items.

•NONE .............. No effect inserted.

•EFF1–4............ Effect 1–4 inserted.

NOTE

•The same effect number can not be selected for multiple channels.

•Inserted internal effects cannot be used with the effect sends and returns.

•SLOT1–16 ....... Select one of these options to insert an external effect unit via an I/O card. If SLOT1 is selected, for example, Output channel 1 of the I/ O card is used to send the signal to the external effect processor, and input channel 1 of the same card is used to return the output from the external effect processor to the channel.

HINT

•When SLOT1–16 is selected for a stereo channel (stereo out- put or bus master), an odd-even channel pair (“SLOT 1-2” for example) will be assigned to the stereo channels and inserted.

When an item other than NONE is selected, an abbre- viation of the insert destination will appear to the right of the colon (“ : ”).

The meanings of the abbreviations are as follows.

Abbreviations	Descriptions
SEND	Effect send/return operation (not inserted in
(EFF1–4 only)	any channel).
IN1–IN16	Inserted in input channel 1–16.
TR1–TR24	Inserted in track channel 1–24.
STEREO	Inserted in stereo output channel.
BUS1–2	Inserted in bus master channel 1, 2.
AUX1–4	Inserted in AUX send master channel 1–4.

14

Effects

AW2400 Owner’s Manual

119