Yamaha AW2400 owner manual Effect Library Operations, Call the Effect Library Screen, 122

Effect Library Operations

Effect Library Operations

The AW2400 provides an effect library for storage and recall of effect settings. Effect library oper- ation is described in this section.

14

Effects

Call the Effect Library Screen

Effect library save and recall operations are carried out via the EFFECT screen FX Lib. page.

1 Press the Selected Channel section [EFFECT] key so that its indicator lights.

The EFFECT screen will appear.

2 Press one of the Selected Channel section knobs 1–4.

The corresponding EFFECT screen will appear.

HINT

•The Effect Library is common to all four internal effect proces- sors, so save and recall operations can be carried out from any EFFECT screen.

3 Press the [F4] key to access the FX Lib. page.

All effect library operations are carried out via the FX Lib. page. The items in this page are as follows.

A

B

C

D

E

F

1Current effect information

This is the same as the EFFECT screen FX Edit page (→ p. 121).

BRENAME button

Accesses the NAME EDIT popup window, where you can edit the name of the library selected in the list.

CRECALL button

Recalls the library data that is selected in the list. Refer to “Recalling Effect Library settings” on page 116 for details on recalling from the library.

DSTORE button

Stores the current effect settings into the location selected in the list.

ECLEAR button

Deletes the library data that is selected in the list.

FList

This area lists the effect data stored in the library. Library numbers 001–043 are read-only, and original settings can be saved to numbers 044–128. The line enclosed by the dotted frame indicates the data that is selected for operation. An icon indicates a read- only library setup.

Changing Effect Library Names

Here’s how you can change the names of the settings in the Effect library.

1 Call the FX Lib. page.

Refer to “Call the Effect Library Screen” on page 122 for details.

2 Move the cursor to the list, and use the [DATA/JOG] dial or [INC]/[DEC] keys to select the library setting to be edited.

The setting highlighted by a dotted frame is currently selected for editing.

3 Move the cursor to the RENAME button and press the [ENTER] key.

The NAME EDIT popup window will appear.

HINT

•Pressing the [F4] key while holding the Display section [SHIFT] key has the same effect as the RENAME button.

4 Enter a name for the selected library set- ting, move the cursor to the OK button, and press the [ENTER] key (refer to page 32 for details on name entry).

This confirms and enters the new name.

122

AW2400 Owner’s Manual