Chapter 5

Recording to a sound clip

The AW2400 has a Sound Clip function that lets you record and play back independently of the recorder section. You can use a sound clip to quickly record and play back your performances on an audio source connected to the AW2400. This is an ideal way to capture ideas for a song or arrangement, or to record a simple accompaniment for practicing a part.

This chapter explains how sound clips can be recorded using an instrument or microphone connected to an input jack.

Recording a sound clip

The post-fader signal of the stereo output channel can be recorded directly to a sound clip. For playback, the signal will be sent to the stereo output channel immediately before the stereo fader (EQ and dynamics cannot be applied to sound clip playback).

Signal flow when using a sound clip

5

Recording to a sound clip

[MIC/LINE INPUT] jacks

Input channels

Metronome

Sound

clip

Stereo output channel

Stereo bus

Mixer section

AW2400 Owner’s Manual

43

Page 43
Image 43
Yamaha AW2400 Recording to a sound clip, Recording a sound clip, Signal flow when using a sound clip, Mixer section