Direct recording and Mixed recording

Assigning input signals to tracks (Direct recording)

This section describes the patching procedure to assign instruments and/or microphones connected to [MIC/LINE INPUT] jacks 1–8 to independent tracks for direct record- ing.

HINT

See page 99 for more details on patching for direct recording.

1Lower the [STEREO] fader to the posi- tion.

2Referring to “Connection and Setup” on page 37, connect your instruments and/or microphones and set up the input levels.

3Call the RECORD screen Direct page by either pressing the Quick Navigate section [RECORD] key as many times as necessary, or by pressing the [F1] key after pressing the [RECORD] key.

Input channel signals can be directly patched to the recorder’s tracks via the RECORD screen Direct page. When this page is called the [INPUT SEL] keys in the upper area of the top panel will flash red.

Input channels

Input select

Tracks

4 Check that “AD1–8” appears in the input select field on the left side of the page.

Input channels 1–8 or 9–16 can be selected as the input source via the input select field. When “AD1–8” is showing the AW2400’s AD inputs ([MIC/LINE INPUT] jacks 1–8) are selected as the input source. If a different input source is selected move the cursor to the input select field and use the [DATA/JOG] dial or [INC]/[DEC] keys to select “AD1–8”.

5 Press the [INPUT SEL] key for the input channel to which your instrument/micro- phone is connected.

The corresponding [INPUT SEL] key will light red, and the remaining [INPUT SEL] keys will go dark.

If, for example, you have selected input channel 1 as your record source the top panel keys will appear as follows.

lit

The display will appear as shown here.

HINT

You can also select an input channel by moving the cursor to the symbol of the desired input channel and pressing the [ENTER] key.

NOTE

To select the [DIGITAL STEREO IN] con- nector as the record source you will need to assign the [DIGITAL STEREO IN] con- nector to an adjacent pair of odd- and even-numbered tracks via the DIGITAL IN field (1.2–15.16). See page 100 for details.

6 Press the Layer section [TRACK 1-12] key so that its indicator lights.

This selects the TRACK 1-12 mixing layer so you can use [ON] keys 1–12, [SEL] keys 1–12, and faders 1– 12 to operate track channels 1–12. At this point faders 1–12 will move to the current level settings for track channels 1–12.

7 Press the [SEL] key of the track channel on which you want to record.

The selected input channel and track will be connected internally. At this time, only the selected [INPUT SEL] key and [SEL] key will be flashing red. The flashing [SEL] key indicates that the corresponding track is in record-ready mode.

If, for example, you have patched input channel 1 to track 1 the top panel keys will appear as follows.

6

Track recording

AW2400 Owner’s Manual

51

Page 51
Image 51
Yamaha AW2400 owner manual Assigning input signals to tracks Direct recording, Display will appear as shown here