Yamaha AW2400 Muting a specific audio track, Switching the virtual track of an audio track, 129

Call the TRACK screen View page.

Audio track operations

Muting a specific audio track

1

2 Move the cursor to the TRACK field, and use the [DATA/JOG] dial or the [INC]/[DEC] keys to select the number of the track you want to mute.

3 Move the cursor to the MUTE button and press the [ENTER] key.

Muting will be switched on/off.

If a track is muted, the MUTE symbol changes to “●.”

When you press the [ENTER] key once again, muting will be defeated and the MUTE symbol will change to “.”

HINT

•This mute function switches muting on or off for the recorder track playback. This also affects the number of simultaneous playback tracks in the recorder section (→ p. 128). It’s a good idea to mute all unused tracks.

•Since 24-bit songs allow a maximum of 12 playback tracks, mute cannot be disengaged for tracks 13-24.

•In some cases, depending on the number of tracks that are in record-ready mode, you won’t be able to un-mute a track. In this case, decrease the number of tracks that are in record- ready mode, and then un-mute the desired track.

Switching the virtual track of an audio track

1 Call the TRACK screen Virtual TR page by either pressing the Work Navigate section [TRACK] key as many times as necessary, or by pressing the [F2] key after pressing the [TRACK] key.

This page contains the following items.

A

B

C

1Virtual tracks

Indicates the status of virtual tracks 1–8. The virtual track that is currently selected for each track is indi- cated by a “●” symbol. Of the virtual tracks that are currently not selected, those that have been recorded are indicated by “”, and those that have not yet been recorded are indicated as “–”.

HINT

•When the AW2400 is in its default state, virtual track 1 is selected for every track.

BVirtual track name

This indicates the name of the virtual track selected by the cursor. This will indicate “-NO REC-” for tracks on which nothing has been recorded.

CTracks

Indicates the track number 1–24.

2 Use the cursor keys to select the virtual track number that you want to assign to the desired track.

3 Press the [ENTER] key.

The “●” symbol will be displayed at the position of the newly-selected virtual track. This virtual track will now be used for recording/playback.

HINT

•To switch the virtual track of the stereo track, use the TRACK screen Stereo TR page.

15

Track operations and editing

AW2400 Owner’s Manual

129