Yamaha AW2400 Output signal patching, Omni OUT Assign field, Option I/O Slot OUT Assign field, 104

Output signal patching

Output signal patching

The PATCH screen Output page lets you select the signals that are assigned to the AW2400’s [OMNI OUT] jacks, [DIGITAL STEREO OUT] connector, and the output channels of an I/O card installed in the I/O slot.

11

Patching and signal flow

To call this page press the Work Navigate section [PATCH] key.

This page contains the following items.

C

A

B

1OMNI OUT ASSIGN field

Move the cursor to fields 1–4 and use the [DATA/JOG] dial or the [INC]/[DEC] keys to select the signal that will be assigned to each [OMNI OUT] jack. Press the [ENTER] key to finalize your selection.

You have the following choices.

Display	Type of signal
---	No assignment
ST L/ST R	Stereo output channel L/R
AUX 1–4	AUX send master 1–4
EFF 1–4	Effect send master 1–4
TR 1–24	Track channel direct outputs 1–24

BOPTION I/O SLOT OUT ASSIGN field

Move the cursor to fields 1–16 and use the [DATA/JOG] dial or the [INC]/[DEC] keys to select the signal that will be assigned to each output channel of a digital I/O card installed in the I/O slot. Press the [ENTER] key to finalize your selection.

You have the following choices.

Display	Type of signal
---	No assignment
ST L/ST R	Stereo output channel L/R
AUX 1–4	AUX send master 1–4
EFF 1–4	Effect send master 1–4
TR 1–24	Track channel direct outputs 1–24
INS*1	Insert send

*1. “INS” will appear only if SLOT1–SLOT16 is selected for INSERT EFF in the CH VIEW screen View page. If you attempt to change “INS” to a different item in the PATCH screen Output page, a popup message (“Used As Effect Insert!”) will appear, and you won’t be able to execute the change. In order to change this, you will first have to defeat the selection for the corresponding output channel in the CH VIEW screen View page.

CD.ST OUT ASSIGN field

Move the cursor to this field and use the [DATA/JOG] dial or the [INC]/[DEC] keys to select the signal that will be assigned to the [DIGITAL STEREO OUT] connector. Press the [ENTER] key to finalize your selection.

You have the following choices.

Display	Type of signal
---	No assignment
ST L&R	Stereo output channel L&R
AUX 1&2, 3&4	AUX send master 1&2, 3&4
EFF 1&2, 3&4	Effect send master 1&2, 3&4
TR 1&2–23&24	Track channel direct outputs 1&2–23&24

HINT

•The signal of the stereo bus is always assigned to the [STEREO OUT] jacks.

104

AW2400 Owner’s Manual