Yamaha AW2400 owner manual Storing scene data, Deleting scene data, Scene will be stored, 161

Scene Memory Operation

Storing scene data

Here’s how to store the current settings in a scene mem- ory.

NOTE

•Scene 0 is a recall-only scene to which new data cannot be stored.

•If you select and store to a scene that already contains data, the previous scene data will be overwritten and lost. Be careful not to overwrite scene data you want to keep.

1Call the SCENE screen Library page by either pressing the [SCENE] key as many times as necessary, or by pressing the [F1] key after pressing the [SCENE] key.

2Use the [DATA/JOG] dial to scroll through the list to select the store destination (the store destination should be enclosed in the dotted frame).

3Move the cursor to the STORE button and press the [ENTER] key.

The NAME EDIT popup window will appear, allow- ing you to assign a name to the data.

HINT

•Pressing the [F2] key while holding the Display section [SHIFT] key has the same effect as the STORE button.

4 Enter the name as required, then move the cursor to the OK button and press the [ENTER] key. (For details on entering a name → p. 32)

The scene will be stored.

Deleting scene data

Here’s how you can delete unwanted scene data.

1 Call the SCENE screen Library page by either pressing the [SCENE] key as many times as necessary, or by pressing the [F1] key after pressing the [SCENE] key.

2 Use the [DATA/JOG] dial to scroll through the list to select the scene to be deleted (the selected scene should be enclosed in the dotted frame).

3 Move the cursor to the CLEAR button and press the [ENTER] key.

A popup window will appear, asking you to confirm the Delete operation.

HINT

		• Pressing the [F3] key while holding the Display section
		[SHIFT] key has the same effect as the CLEAR button.
4 To execute the Delete operation, move the
	cursor to the OK button and press the
	[ENTER] key.
	The scene will be deleted.
	Protecting a scene
Applying protection to a scene so that it can’t be edited or
erased.
1 Call the SCENE screen Library page by
	either pressing the [SCENE] key as many
	times as necessary, or by pressing the [F1]
	key after pressing the [SCENE] key.
2 Use the [DATA/JOG] dial to scroll through
	the list to select the scene to be protected
	(the selected scene should be enclosed in		17
	the dotted frame).
3 Move the cursor to the PROTECT button			Memory
	and press the [ENTER] key.
	When protection is turned on the PROTECT button
	will appear inverted and a lock icon will appear to the		Scene
	right of the scene name.

“lock” icon

AW2400 Owner’s Manual

161