Yamaha AW2400 Time Compression/Expansion, If you set Ratio = 50%, If you set Ratio = 200%, 141

List of editing command

EXCHANGE

Exchanges data between the specified tracks.

A B C

		D			E		F
From
				1	2	3	4	5	6
Track
To
	A	B	C	D	E	F
Track
					EXCHANGE
From
	A	B	C	D	E	F
Track
To
				1	2	3	4	5	6
Track

■Parameter list

Parameter	Range	Explanation
	1–24	A single audio track
A From TR	1&2–23&24	A pair of adjacent odd-numbered/
		even-numbered audio tracks
	ST	The stereo track
B From V.TR	1–8	Exchange-source virtual track
		number
	Up to eight	Exchange-source virtual track
C Name	alphanumeric
		name (display only)
	characters
	1–24	A single audio track
D To TR *1
	1&2–23&24	A pair of adjacent odd-numbered/
		even-numbered audio tracks
E To V.TR	1–8	Exchange-destination virtual track
		number
	Up to eight	Exchange-destination virtual track
F Name	alphanumeric
		name (display only)
	characters

*1. The items that you can select in D To TR (copy-destination track) will depend on the A From TR (copy-source track) setting.

If A From TR is a single audio track 1–24, you can select only a sin- gle audio track 1–24.

If A From TR is ST or 1&2–23&24 (a pair of adjacent audio tracks), you can select only 1&2–23&24 (a pair of adjacent audio tracks).

NOTE

• The track names will not be exchanged.

TIME COMP

(Time Compression/Expansion)

Adjusts the length of the specified region of an audio track, without changing the pitch.

A B C D

EF

●If you set Ratio = 50%

From Start		From End
1	2 3	4	A	B	C	D
				TIME
			COMP/EXP
1	2 3 4		A	B	C	D

To END

●If you set Ratio = 200%

	From Start				From End
	1	2		3	4		A	B	C	D
			TIME
			COMP/EXP
	1	2			3	4			C	D
								To END			15
											editing
■ Parameter list											and
Parameter				Range					Explanation
			1–24			A single audio track					operations
A From TR			1&2–23&24			A pair of adjacent odd-numbered/
						even-numbered audio tracks
			ST			The stereo track
B From V.TR			1–8			Virtual track number					Track
C From Start			Specify a point			Beginning of the edited region
D From End			Specify a point			End of the edited region
						Specify the length to which the
E TO END			Specify a point			selected region will be com-
						pressed or expanded
						Specify the percentage by which
F To Ratio			50–200%			the selected region will be com-
						pressed or expanded

NOTE

•TO END and To Ratio are linked, so that editing one field will cause the other field to change.

•You cannot set TO END or To Ratio to a value that would cause the ratio to exceed 50–200 percent.

•From Start value and From End value must be at least 45 msec apart. These cannot be set to a shorter interval.

AW2400 Owner’s Manual

141