Yamaha AW2400 owner manual Postroll Time, Direct OUT Extract Position, 211

AW2400 Preferences

FPOSTROLL TIME

Specifies the duration of postroll (the amount of playback time after the punch-out point) when you use Auto Punch- out from 0 to 20 seconds.

GDIRECT OUT EXTRACT POSITION

Selects the point in the input channel or track channel from which the signal will be taken when using DIRECT OUT. Press the [ENTER] key to confirm your selection.

•PRE FADER..........the signal prior to the channel fader

•POST FADER .......the signal after the channel fader

HSTORE CONFIRMATION button

Specifies whether the NAME EDIT popup window (allowing you to assign a name) will appear when you store a scene/library.

IRECALL CONFIRMATION button

Specifies whether a popup window will ask you for confir- mation when recalling a scene or library.

JSYNC CAUTION DIGITAL ST IN button

Determines whether an error message will be displayed when a signal that is not synchronized with the word clock source appears at the DIGITAL STEREO IN connector.

KSYNC CAUTION SLOT IN button

Determines whether an error message will be displayed when a signal that is not synchronized with the word clock source appears at a digital input on an I/O card installed in the I/O slot.

LAUTO SAVE button

Enables or disables the Auto Save function. When the Auto Save function is enabled the current song state will be backed up to temporary memory when one of the fol- lowing occurs. If the power is accidentally turned off before the unit is properly shut down, the song will be restored from the backup data in temporary memory the next time the power is turned on.

•Recording is stopped.

•Track editing is ended.

•Import from the CD-RW drive is completed.

•Import of a WAV file is completed.

MAUTO DISPLAY button

Determines whether the display screen related to a key or knob operated in the Selected Channel section will appear automatically (ON), or whether the display will remain as it is and a popup window for the corresponding parameter will appear (OFF).

NCD/ST TR PLAY MODE MUTE/MIX button

Determines whether the input channels will be output together with CD or stereo playback (MIX), or whether only the CD or stereo track signal will be output (MUTE).

21

Utility functions

AW2400 Owner’s Manual

211