Yamaha AW2400 owner manual Installing the Sonar template file, 270

About the CD-ROM included with the AW2400

●Installing the SONAR template file

1 Copy the SONAR template file from the included CD-ROM to the folder in which SONAR is installed.

2 Start up SONAR.

3 In the menu bar, select [File] menu ➝ [Open].

4 The “Open file” dialog box will appear. Choose Cakewalk template files as the type of file to be loaded. From the list in the dialog box, choose “Yamaha AW2400 Remote” and click the [OK] button.

5 In the menu bar, select [Option] ➝

[MIDI Devices].

6 The MIDI Ports window will open. In the Input Ports field, assign the MIDI device that you are using.

If you changed the track structure from the

default settings of the template ...

With the Yamaha AW2400 Remote template started, click the [CONFIG] button in the StudioWare panel window. A cluster will open at the right.

Drag the [SET MIDI First Track] knob to the first track number of the MIDI tracks.

*If you use this template, you will not be able to control the tracks correctly from the AW2400 unless the MIDI tracks are continuous from 1–16.

*If you set the value to an invalid track (an unused track), the panel knobs, buttons, or sliders may be shaded. If this occurs, set the value back to the correct track.

Appendix

■Macintosh users

NOTE

•In order to use a remote file, the corresponding software must be installed.

•Please be aware that the menu names and screens that appear in the explanation below may differ depending on the software you are using.

●Installing the Cubase/Nuendo remote setup file

For Cubase/Nuendo, the procedure is the same as for the Windows version. (→ p. 269).

●Installing the Logic Pro preference file

1 Start up Logic Pro.

2 In the menu bar, select [Logic Pro] menu ➝ [Preferences] ➝ [Key Commands...].

3 The Key Commands window will open. In the menu bar, select [Options] ➝ [Import Key

Commands].

4 A dialog box will appear. Select the Logic preference file (Logic Preferences) from the included CD-ROM, and click the [Open] but- ton.

When you import the file, the following settings will be made.

*Please note that all the previously-specified key com- mands will be initialized. If you do not want to change your existing user key command settings, you can manu- ally make the MIDI channel and CC# settings shown above.

270

AW2400 Owner’s Manual