Emerson 400508-02 Software Installation, PC System Configuration, Installing PowerTools FM-3

Installation

Software Installation

Emerson Motion Control PowerTools® FM-3 software was designed for users who need access to all setup options and diagnostic information for the drive. The software provides access to all commonly used drive parameters.

PC System Configuration

Required:

•Microsoft® Windows® 95/98 or Microsoft Windows NT® 4.0 (service pack 3)

•Serial port

•Mouse

•3.5" floppy drive for installation

Recommended:

•16 MB or more RAM for Windows 95/98, and 32 MB or more for Windows NT.

•Up to 45 MB of hard disk space required for a full installation; 15 MB for minimum installation.

Optional:

•Windows-compatible printer

•Modem and Internet access

Preparing for PowerTools FM-3 Installation

•Close all programs and turn off virus protection software to prevent installation conflicts.

•If you have another version of PowerTools on your computer and do not want to overwrite that version, change the default installation folder for PowerTools during installation setup.

•To avoid overwriting programs you have customized or created, place them into a separate folder before you install.

Installing PowerTools FM-3

You must be running Microsoft Windows 95/98 or Microsoft Windows NT 4.0 to install M-3.

To install PowerTools:

1.Insert the PowerTools disk 1 into the floppy drive.

2.From the Start menu, choose Run.

5