Emerson 400508-02 Diagnostics and Troubleshooting, Diagnostic Display, Display Indication, Status

Diagnostics and Troubleshooting

Diagnostic Display

The diagnostic segment display on the front of the drive shows drive status, FM-3 status, and fault codes. When a fault condition occurs, the drive will display the fault code, overriding the status code. The alphanumeric display on the FM-3 provides additional fault information.

The decimal point is “On” when the drive is enabled, and the stop input is not active. This indicates that the drive is ready to run and any motion command will cause motion. Motion commands will not cause motion unless you are Ready (R) and the decimal point is “On”.

Display Indication

Status

Ready

Disabled

RMS Foldback

Stall Foldback

(E Series drive only)

Ready to Run

Homing

Indexing

Description

The FM-3 and E Series drive system is functioning normally and is ready to execute a motion command.

Power Stage is disabled.

Motor torque is limited to 80 percent.

Drive output current is limited to 80 percent of drive stall current.

Drive enabled. No stop input.

Home is executing.

Index is executing.

FM-3 Keypad Display

Drive Type	Address
Motor Type
Menu Groups
Drive Type	Address
Motor Type
Menu Groups
Drive Type	Address
Motor Type
Menu Groups
Drive Type	Address
Motor Type
Menu Groups
Drive Type	Address
Motor Type
Menu Groups
Drive Type	Address
Motor Type
Menu Groups
Drive Type	Address
Motor Type
Menu Groups

9