Yamaha AW2400 owner manual Selected Channel section, Monitor section, Scene/Automix/USB section

Parts of the AW2400 and what they do

■Selected Channel section

2	1
Introducingthe	B
	C
AW2400	D
	E	F

G

1[VIEW] key

This key accesses the CH VIEW screen, where you can check the level of each channel, or perform on-screen adjustments to the faders and other mix parameters of each channel.

B[DYN] key

Calls the DYNAMICS screen for the currently selected channel. You can then press any of the SELECTED CHANNEL knobs — 1 through 4 — to access the corre- sponding dynamics parameters.

C[AUX] key

Calls the AUX screen for the currently selected channel. You can then press any of the SELECTED CHANNEL knobs — 1 through 4 — to access the corresponding AUX parameters.

D[EFFECT] key

Calls the EFFECT screen for the currently selected chan- nel. You can then press any of the SELECTED CHAN- NEL knobs — 1 through 4 — to access the corresponding EFFECT parameters.

E[PAN/EQ] key

Calls the PAN/EQ screen for the currently selected chan- nel. After pressing the [PAN/EQ] key, you can press any of the Selected Channel knobs 1 through 4 to switch the PAN/EQ screen pages.

FSELECTED CHANNEL knobs 1–4

These knobs are used to adjust the various parameters for the selected channel. Press any of these knobs after press- ing the [DYN], [AUX], [EFFECT] or [PAN/EQ] key to call the corresponding parameter screen.

G[LOW], [LO-MID], [HI-MID], and [HIGH] keys

These keys specify the EQ band to be adjusted by the SELECTED CHANNEL knobs when the EQ screen EQ page is showing.

■Monitor section

12

1[MONITOR] knob

This knob adjusts the level of the signal that is output from the [MONITOR OUT] jacks.

B[PHONES] knob

This knob adjusts the level of the signal that is output from the [PHONES] jack.

■Scene/Automix/USB section

1 2 3

1[SCENE] key

This key accesses the SCENE screen, where you can save or recall scene memories.

B[AUTOMIX] key

This key accesses the AUTOMIX screen which allows control and editing of automix operations.

C[USB] key

The [USB] keys calls up the USB screen with parameters related to USB operation.

24

AW2400 Owner’s Manual