Using the MIDI Remote function

The MIDI channels corresponding to the faders and [ON] keys appears as follows when the REMOTE screen 1–12 and 13–16 pages are selected.

When the 1–12 page is showing.

Fader/[ON] Key

1

2

3

4

5

6

7

8

9

10

11

12

MIDI Channel

1

2

3

4

5

6

7

8

9

10

11

12

When the 13–16 page is showing.

Fader/[ON] Key

1

2

3

4

5

6

7

8

9

10

11

12

MIDI Channel

13

14

15

16

 

 

 

 

N/A

 

 

 

To call the REMOTE screen 1–12 page press the Layer section [REMOTE] key as many times as necessary, or press the [F1] key after pressing the [REMOTE] key.

B

A

C

D

To call the REMOTE screen 13–16 page press the Layer section [REMOTE] key as many times as necessary, or press the [F2] key after pressing the [REMOTE] key (Operation of the 13–16 page is the same as the 1–12 page).

HINT

The MIDI Remote function will automatically be on while the REMOTE screen is displayed. The channel faders and [ON] keys will not perform their usual functions, but will work as specified by the preset you have selected in the REMOTE screen.

This page contains the following items.

1MODE box

Selects one of the ten presets. Move the cursor to a box and use the [DATA/JOG] dial or [INC]/[DEC] keys to select the corresponding preset for instantaneous MIDI message assignment.

The AW2400 provides the following presets.

Cubase

Logic

Sonar

Protools

These presets let you use the AW2400 as a physical con- troller for various software sequencers.

[ON] key operations will control mute on/off opera- tions on the sequencer software.

Fader operations will control the volume of the sequencer software tracks.

You will need to install the appropriate setting file into your sequencer software, and make the necessary settings. For details, refer to the “About the CD-ROM included with the AW2400” (p. 266).

Volume/Rec TR

Use this preset to control the volume of an external tone generator or the record tracks of an external recorder.

[ON] key operations will transmit MMC commands to select recording tracks.

Fader operations will transmit Volume control changes (CC#=07).

Volume

Use this preset to control the volume of an external tone generator.

When you turn an [ON] key off (indicator out), volume = 0 will be transmitted.

When you turn an [ON] key on (lit green), the volume value corresponding to the fader position will be trans- mitted.

When an [ON] key is on, operating the fader will trans- mit Volume control change messages (CC#=07).

20

MIDI

AW2400 Owner’s Manual

205

Page 205
Image 205
Yamaha AW2400 owner manual Mode box, Cubase Logic Sonar Protools, Volume/Rec TR, 205